logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Irrigation Comments

  • Question
  • If Dc is the critical depth, D is the depth of water down stream and HL is the total head loss at the cistern of a vertical fall, the depth x of the cistern below the bed level down stream suggested by Blench, is


  • Options
  • A. If Dc is the critical depth, D is the depth of water down stream and HL is the total head loss at th
  • B. If Dc is the critical depth, D is the depth of water down stream and HL is the total head loss at th
  • C. If Dc is the critical depth, D is the depth of water down stream and HL is the total head loss at th
  • D. If Dc is the critical depth, D is the depth of water down stream and HL is the total head loss at th

  • Correct Answer
  •  


  • Irrigation problems


    Search Results


    • 1. Lane's weighted creep theory assumes

    • Options
    • A. equal weightage to horizontal and vertical creeps
    • B. double weightage to horizontal creep and one weightage to vertical creep
    • C. triple weightage to horizontal creep and one weightage to vertical creep
    • D. triple weightage to vertical creep and one weightage to horizontal creep
    • E. double weightage to vertical creep and one weightage to horizontal creep.
    • Discuss
    • 2. Pick up the correct sequence of the part of a canal system from the following

    • Options
    • A. Head work-distributary-branch canal-minor
    • B. Head works-main canal-branch canal-dis-tributary-minor
    • C. Head works-main canal-branch canal-minor-distributary
    • D. Heads works-branch canal-main canal distributary, minor.
    • Discuss
    • 3. According to Kennedy, the critical velocity (V0) in metres in a channel is the mean velocity which keeps the channel free from silting or scouring. Its value is given by (where m is critical velocity ratio and D is the depth of the channel).

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 4. Pick up the correct statement from the following

    • Options
    • A. Escapes are essential safety valves in a canal system
    • B. The capacity of escapes should not be less than the capacity of the canal at its location
    • C. The escapes must lead the surplus water to natural drainages
    • D. The escapes are aligned to take advantage of contours of lower values
    • E. All the above.
    • Discuss
    • 5. A current meter measures the velocity of flow, if it is held

    • Options
    • A. on the surface of water
    • B. at the bottom of channel
    • C. at any point within the cross-section
    • D. none of these.
    • Discuss
    • 6. According to Lacey, in regime conditions

    • Options
    • A. silt is kept in suspension by vertical components of eddies
    • B. entire cross-section of the channel is generated at all points by the forces normal to the wetted perimeter
    • C. both (a) and (b)
    • D. neither (a) nor (b).
    • Discuss
    • 7. A river is said to be of

    • Options
    • A. aggrading type if it builds up its bed to a certain slope
    • B. degrading type if it cuts its bed to a certain slope
    • C. meandering type if it flows in sinuous curve
    • D. all the above.
    • Discuss
    • 8. The field capacity of a soil depends upon

    • Options
    • A. capillary tension in soil
    • B. porosity of soil
    • C. both (a) and (b)
    • D. neither (a) nor (b).
    • Discuss
    • 9. According to Railway Board, no diamond crossing should be flatter than

    • Options
    • A. 1 in 6
    • B. 1 in
    • C. 1 in 12
    • D. 1 in 16
    • Discuss
    • 10. Coning of wheels is provided

    • Options
    • A. to check lateral movement of wheels
    • B. to avoid damage to inner faces of rails
    • C. to avoid discomfort to passengers
    • D. All the above.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment