Discussion
Home ‣ Civil Engineering ‣ RCC Structures Design Comments
- Question
If the width of the foundation for two equal columns is restricted, the shape of the footing generally adopted, is
Options- A. square
- B. rectangular
- C. trapezoidal
- D. triangular.
- Correct Answer
- rectangular
- 1. The ratio of the breadth to effective depth of a beam is kept
Options- A. 0.25
- B. 0.50
- C. 0.70
- D. 0.75
- E. none of these. Discuss
- 2. For a continuous floor slab supported on beams, the ratio of end span length and intermediate span length, is
Options- A. 0.6
- B. 0.7
- C. 0.8
- D. 0.9 Discuss
- 3. If Ac, Asc and A are areas of concrete, longitudinal steel and section of a R.C.C. column and m and ?c are the modular ratio and maximum stress in the configuration of concrete, the strength of column is
Options- A. ?cAc + m ?cAsc
- B. ?c(A - Asc) + m ?cAsc
- C. ?c[A + (m - 1)ASC]
- D. all the above. Discuss
- 4. After prestressing process is completed, a loss of stress is due to
Options- A. shrinkage of concrete
- B. elastic shortening of concrete
- C. creep of concrete
- D. creep of steel
- E. all the above. Discuss
- 5. An R.C.C. column is treated as short column if its slenderness ratio is less than
Options- A. 30
- B. 35
- C. 40
- D. 50
- E. 60 Discuss
- 6. If p1 and P2 are effective lateral loadings at the bottom and top exerted by a level earth subjected to a superload on the vertical face of height h of a retaining wall, the horizontal pressure p per unit length of the wall, is
Options- A.
- B.
- C.
- D.
Discuss
- 7. The self-weight of the footing, is
Options- A. not considered for calculating the upward pressure on footing
- B. also considered for calculating the upward pressure on footihg
- C. not considered for calculating the area of the footing
- D. both (b) and (c) Discuss
- 8. By over-reinforcing a beam, the moment of resistance can be increased not more than
Options- A. 10%
- B. 15%
- C. 20%
- D. 25% Discuss
- 9. In case the factor of safety against sliding is less than 1.5, a portion of slab is constructed downwards at the end of the heel slab, which is known as
Options- A. a key
- B. a cut-off wall
- C. a rib
- D. all the above. Discuss
- 10. For normal cases, stiffness of a simply supported beam is satisfied if the ratio of its span to its overall depth does not exceed
Options- A. 10
- B. 15
- C. 20
- D. 25
- E. 30 Discuss
RCC Structures Design problems
Search Results
Correct Answer: 0.50
Correct Answer: 0.9
Correct Answer: all the above.
Correct Answer: all the above.
Correct Answer: 50
Correct Answer:
Correct Answer: not considered for calculating the upward pressure on footing
Correct Answer: 25%
Correct Answer: all the above.
Correct Answer: 20
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.