logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering RCC Structures Design Comments

  • Question
  • A flat slab is supported


  • Options
  • A. on beams
  • B. on columns
  • C. on beams and columns
  • D. on columns monolithicaily built with slab
  • E. all the above

  • Correct Answer
  • on columns monolithicaily built with slab 


  • RCC Structures Design problems


    Search Results


    • 1. On piles, the drop must be at least

    • Options
    • A. 80 cm
    • B. 100 cm
    • C. 120 cm
    • D. 140 cm
    • E. 150 cm
    • Discuss
    • 2. The thickness of the flange of a Tee beam of a ribbed slab is assumed as

    • Options
    • A. width of the rib
    • B. depth of the rib
    • C. thickness of the concrete topping 0d) half the thickness of the rib
    • D. twice the width of the rib.
    • Discuss
    • 3. The minimum clear cover for R.C.C. columns shall be

    • Options
    • A. greater of 40 mm or diameter
    • B. smaller of 40 mm or diameter
    • C. greater of 25 mm or diameter
    • D. smaller of 25 mm or diameter
    • Discuss
    • 4. The live load to be considered for an accessible roof, is

    • Options
    • A. Nil
    • B. 75 kg/m3
    • C. 150 kg/m2
    • D. 200 kg/cm2
    • Discuss
    • 5. In favourable circumstances a 15 cm concrete cube after 28 days, attains a maximum crushing strength

    • Options
    • A. 100 kg/cm2
    • B. 200 kg/cm2
    • C. 300 kg/cm2
    • D. 400 kg/cm2
    • E. 500 kg/cm2
    • Discuss
    • 6. If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is

    • Options
    • A. 200 cm
    • B. 300 cm
    • C. 150 cm
    • D. 100 cm
    • Discuss
    • 7. If jd is the lever arm and ?O is the total perimeter of reinformcement of an R.C.C. beam, the bond stress at the section having Q shear force, is

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 8. A raft foundation is provided if its area exceeds the plan area of the building by

    • Options
    • A. 10%
    • B. 20%
    • C. 30%
    • D. 40%
    • E. 50%
    • Discuss
    • 9. Though the effective depth of a T-beam is the distance between the top compression edge to the centre of the tensile reinforcement, for heavy loads, it is taken as

    • Options
    • A.
    • B.
    • C.
    • D.
    • E.
    • Discuss
    • 10. A singly reinforced beam has breadth b, effective depth d, depth of neutral axis n and critical neutral axis n1. If fc and ft are permissible compressive and tensile stresses, the moment to resistance of the beam, is

    • Options
    • A.
    • B.
    • C.
    • D. all the above
    • Discuss


    Comments

    There are no comments.

Enter a new Comment