logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering RCC Structures Design Comments

  • Question
  • If the shear stress in a R.C.C. beam is


  • Options
  • A. equal or less than 5 kg/cm2, no shear reinforcement is provided
  • B. greater than 4 kg/cm2, but less than 20 kg/cm2, shear reinforcement is provided
  • C. greater than 20 kg/cm2, the size of the section is changed
  • D. all the above.

  • Correct Answer
  • all the above. 


  • RCC Structures Design problems


    Search Results


    • 1. The anchorage value of a hook is assumed sixteen times the diameter of the bar if the angle of the bend, is

    • Options
    • A. 30°
    • B. 40°
    • C. 45°
    • D. 60°
    • E. all the above.
    • Discuss
    • 2. The length of the lap in a compression member is kept greater than bar diameter x (Permissible stress in bar / Five times the bond stress) or

    • Options
    • A. 12 bar diameters
    • B. 18 bar diameters
    • C. 24 bar diameters
    • D. 30 bar diameters
    • E. 36 bar diameters
    • Discuss
    • 3. Piles are usually driven by

    • Options
    • A. diesel operated hammer
    • B. drop hammer
    • C. single acting steam hammer
    • D. all the above.
    • Discuss
    • 4. Design of R.C.C. cantilever beams, is based on the resultant force at

    • Options
    • A. fixed end
    • B. free end
    • C. mid span
    • D. mid span and fixed support.
    • Discuss
    • 5. A part of the slab may be considered as the flange of the T-beam if

    • Options
    • A. flange has adequate reinforcement transverse to beam
    • B. it is built integrally with the beam
    • C. it is effectively bonded together with the beam
    • D. all the above.
    • Discuss
    • 6. In a combined footing for two columns carrying unequal loads, the maximum hogging bending moment occurs at

    • Options
    • A. less loaded column
    • B. more loaded column
    • C. a point equidistant from either column
    • D. a point of the maximum shear force
    • E. a point of zero shear force.
    • Discuss
    • 7. P is the prestressed force applied to the tendon of a rectangular prestressed beam whose area of cross section is A and sectional modulus is Z. The maximum stress f in the beam, subjected to a maximum bending moment M, is

    • Options
    • A.
    • B.
    • C.
    • D.
    • E.
    • Discuss
    • 8. A circular slab subjected to external loading, deflects to form a

    • Options
    • A. semi-hemisphere
    • B. ellipsoid
    • C. parabolloid
    • D. none of these.
    • Discuss
    • 9. The Total pressure on the vertical face of a retaining wall of height h exerted by the retained earth weighing w per unit volume having an angle of surcharge ?°, is :

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 10. If Sb, is the average bond stress on a bar of diameter d subjected to maximum stress t, the length of the embedment l is given by

    • Options
    • A.
    • B.
    • C.
    • D.
    • E.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment