logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering RCC Structures Design Comments

  • Question
  • If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a


  • Options
  • A. simply supported beam
  • B. continuous beam
  • C. cantilever beam
  • D. none of these.

  • Correct Answer
  • cantilever beam 


  • RCC Structures Design problems


    Search Results


    • 1. The maximum shear stress (qmax) in a rectangular beam is

    • Options
    • A. 1.25 times the average
    • B. 1.50 times the average
    • C. 1.75 times the average
    • D. 2.0 times the average
    • E. 2.5 times the average.
    • Discuss
    • 2. If p1 is the vertical intensity of pressure at a depth h on a block of earth weighing w per unit volume and the angle of repose ?, the lateral intensity of pressure p2 is

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 3. A pile of length L carrying a uniformly distributed load W per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is

    • Options
    • A.
    • B.
    • C.
    • D.
    • E.
    • Discuss
    • 4. In a simply supported slab the minimum spacing of distribution reinforcement, should be four times the effective thickness of the slab or

    • Options
    • A. 20 cm
    • B. 30 cm
    • C. 40 cm
    • D. 50 cm
    • E. 60 cm
    • Discuss
    • 5. The advantage of reinforced concrete, is due to

    • Options
    • A. monolithic character
    • B. fire-resisting and durability
    • C. economy because of less maintenance cost
    • D. moulding in any desired shape
    • E. All the above.
    • Discuss
    • 6. According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than

    • Options
    • A. 20 cm
    • B. 30 cm
    • C. 40 cm
    • D. 50 cm
    • E. 75 cm
    • Discuss
    • 7. A pile of length L carrying a uniformly distributed load W per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be

    • Options
    • A.
    • B.
    • C.
    • D.
    • E.
    • Discuss
    • 8. The length of lap in tension reinforcement should not be less than the bar diameter x (actual tension / four times the permissible average bond stress) if it is more than

    • Options
    • A. 18 bar diameters
    • B. 24 bar diameters
    • C. 30 bar diameters
    • D. 36 bar diameters
    • Discuss
    • 9. Total pressure on the vertical face of a retaining wall of height h acts parallel to free surface and from the base at a distance of

    • Options
    • A. h/4
    • B. h/3
    • C. h/2
    • D. 2h/3
    • Discuss
    • 10. If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2, the length of the beam having nominal reinforcement, is

    • Options
    • A. 4 cm
    • B. 6 m
    • C. 8 m
    • D. 10 m
    • Discuss


    Comments

    There are no comments.

Enter a new Comment