logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering RCC Structures Design Comments

  • Question
  • In a simply supported slab the minimum spacing of distribution reinforcement, should be four times the effective thickness of the slab or


  • Options
  • A. 20 cm
  • B. 30 cm
  • C. 40 cm
  • D. 50 cm
  • E. 60 cm

  • Correct Answer
  • 60 cm 


  • RCC Structures Design problems


    Search Results


    • 1. The advantage of reinforced concrete, is due to

    • Options
    • A. monolithic character
    • B. fire-resisting and durability
    • C. economy because of less maintenance cost
    • D. moulding in any desired shape
    • E. All the above.
    • Discuss
    • 2. The width of the rib of a T-beam, is generally kept between

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 3. The maximum ratio of span to depth of a cantilever slab, is

    • Options
    • A. 8
    • B. 10
    • C. 12
    • D. 14
    • E. 16
    • Discuss
    • 4. If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2, the share stirrups are provided for a distance x from either end where x is

    • Options
    • A. 50 cm
    • B. 100 cm
    • C. 150 cm
    • D. 200 cm
    • Discuss
    • 5. An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is

    • Options
    • A. 8.3 kg/cm2
    • B. 7.6 kg/cm2
    • C. 21.5 kg/cm2
    • D. 11.4 kg/cm2
    • Discuss
    • 6. A pile of length L carrying a uniformly distributed load W per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is

    • Options
    • A.
    • B.
    • C.
    • D.
    • E.
    • Discuss
    • 7. If p1 is the vertical intensity of pressure at a depth h on a block of earth weighing w per unit volume and the angle of repose ?, the lateral intensity of pressure p2 is

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 8. The maximum shear stress (qmax) in a rectangular beam is

    • Options
    • A. 1.25 times the average
    • B. 1.50 times the average
    • C. 1.75 times the average
    • D. 2.0 times the average
    • E. 2.5 times the average.
    • Discuss
    • 9. If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a

    • Options
    • A. simply supported beam
    • B. continuous beam
    • C. cantilever beam
    • D. none of these.
    • Discuss
    • 10. According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than

    • Options
    • A. 20 cm
    • B. 30 cm
    • C. 40 cm
    • D. 50 cm
    • E. 75 cm
    • Discuss


    Comments

    There are no comments.

Enter a new Comment