logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Waste Water Engineering See What Others Are Saying!
  • Question
  • Drop manholes are the manholes


  • Options
  • A. without entry ladders
  • B. without manhole covers
  • C. with depths more than 3.5 m
  • D. having drains at different levels.

  • Correct Answer
  • having drains at different levels. 


  • More questions

    • 1. A hydraulic structure is designed to withstand

    • Options
    • A. seepage forces
    • B. hydraulic jump
    • C. hydraulic pressure
    • D. all the above.
    • Discuss
    • 2. The motion of a particle moving with S.H.M. from an extremity to the other, constitutes

    • Options
    • A. half an oscillation
    • B. one full oscillation
    • C. two oscillations
    • D. none of these.
    • Discuss
    • 3. The shrinkage of concrete

    • Options
    • A. is proportional to water content is the mix
    • B. is proportional to cement concrete
    • C. increases with age of concrete
    • D. all the above.
    • Discuss
    • 4. The form work from the underside of slabs, can be removed only after

    • Options
    • A. 1 day
    • B. 4 days
    • C. 7 days
    • D. 14 days.
    • Discuss
    • 5. Pick up the correct statement function following:

    • Options
    • A. The coarse material which has a smaller angle of repose, causes a steeper beach slope
    • B. The coarse material which has a greater angle of repose, causes a steeper beach slope
    • C. The flattening out of the beach is caused due to the movement of small and uniform particles leeward.
    • D. both (b) and (c).
    • Discuss
    • 6. A stair should not have pitch more than

    • Options
    • A. 25°
    • B. 30°
    • C. 40°
    • D. 50°
    • E. 60°.
    • Discuss
    • 7. The great circle which passes through the zenith, nadir and the poles, is known as

    • Options
    • A. meridian
    • B. vertical circle
    • C. prime vertical
    • D. none of these.
    • Discuss
    • 8. A beam of length L supported on two intermediate rollers carries a uniformly distributed load on its entire length. If sagging B.M. and hogging B.M. of the beam are equal, the length of each overhang, is

    • Options
    • A. 0.107 L
    • B. 0.207 L
    • C. 0.307 L
    • D. 0.407 L
    • E. 0.5 L.
    • Discuss
    • 9. In Indian railways, the ratio of axle load and weight of rail, is

    • Options
    • A. 312
    • B. 412
    • C. 512
    • D. 600
    • Discuss
    • 10. According to the recommendations of IS : 456-1978, the expansion joints

    • Options
    • A. are provided where plane changes abruptly
    • B. are provided to ensure minimum resistance
    • C. are supported on separate columns
    • D. do not carry reinforcement across them
    • E. all the above.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment