Discussion
Home ‣ Civil Engineering ‣ Waste Water Engineering Comments
- Question
It is customary to design a sewer for D.W.F. on the basis of
Options- A. average demand
- B. twice the average demand
- C. thrice the average demand
- D. four times the average demand.
- Correct Answer
- thrice the average demand
- 1. If the depletion of oxygen is found to be 2.5 mg/litre after incubating 2.5 ml of sewage diluted to 250 ml for 5 days at 20°C, B.O.D. of the sewage is
Options- A. 50 mg/l
- B. 100 mg/l
- C. 150 mg/l
- D. 200 mg/l
- E. 250 mg/l. Discuss
- 2. A manhole is classified as shallow if its depth is between
Options- A. 0.4 to 0.5 m
- B. 0.5 to 0.7 m
- C. 0.7 to 0.9 m
- D. 0.9 to 1.20 m
- E. 1.2 to 1.50 m. Discuss
- 3. The sewer pipe which carries sewage from a building for immediate disposal is
Options- A. house sewer
- B. lateral sewer
- C. intercepting sewer
- D. main sewer. Discuss
- 4. To prevent settling down of sewage both at the bottom and on the sides of a large sewer, self-cleaning velocity recommended for Indian conditions, is
Options- A. 0.50 m/sec
- B. 0.60 m/sec
- C. 0.70 m/sec
- D. 0.75 m/sec
- E. 1.0 m/sec. Discuss
- 5. In septic tanks,
Options- A. free board of 0.3 m may be provided
- B. the baffles or tees are extended up to top level of scum
- C. the clear space between the baffle top and covering slab is about 7.5 cm
- D. the inlet is kept 30 cm below the sewage line and outlet is kept at a level 40% depth of the sewage
- E. all the above. Discuss
- 6. The detention period for plain sedimentation water tanks, is usually
Options- A. 4 to 8 hours
- B. 8 to 16 hours
- C. 16 to 24 hours
- D. 24 to 36 hours. Discuss
- 7. Sewer ventilating columns are generally placed at
Options- A. distances 150 m to 300 m
- B. upper ends of branch sewers
- C. every change in the size of sewers
- D. all the above. Discuss
- 8. In case of Imhoff tanks,
Options- A. the shape is rectangular
- B. detention period is 2 hours
- C. the velocity of flow is restricted to 0.30 m/minute
- D. surface loading is limited to 30, 000 litres/m of plan area per day
- E. All the above. Discuss
- 9. Pick up the correct statement from the following :
Options- A. The materials separated by screens, is called screenings
- B. The screenings are disposed off either by burning or by burial or by dumping
- C. The process of burning the screenings, is called incineration
- D. The process of burning the screenings, is known as compositing
- E. All the above. Discuss
- 10. In sewers the highest non-scouring velocity is achieved in
Options- A. glazed bricks sewers
- B. cast iron sewers
- C. cement concrete sewers
- D. stone ware sewers. Discuss
Waste Water Engineering problems
Search Results
Correct Answer: 250 mg/l.
Correct Answer: 0.7 to 0.9 m
Correct Answer: house sewer
Correct Answer: 0.75 m/sec
Correct Answer: all the above.
Correct Answer: 4 to 8 hours
Correct Answer: all the above.
Correct Answer: All the above.
Correct Answer: All the above.
Correct Answer: glazed bricks sewers
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.