Discussion
Home ‣ Civil Engineering ‣ Waste Water Engineering Comments
- Question
Which one of the following tests is used for testing sewer pipes :
Options- A. water test
- B. ball test
- C. mirror test
- D. all of these.
- Correct Answer
- all of these.
- 1. Rate of flow of sewage is generally assumed
Options- A. more than the rate of water supply
- B. equal to the rate of water supply
- C. less than the rate of water supply
- D. at 150 litres per capita. Discuss
- 2. The liquid wastes from kitchens, bath rooms and wash basins, is not called
Options- A. liquid waste
- B. sullage
- C. sewage
- D. none of these. Discuss
- 3. Fresh sewage may become stale in
Options- A. one hour
- B. two to three hours
- C. three to four hours
- D. six hours.
- E. ten hours. Discuss
- 4. If the depth of partial flow in a sewer of diameter 2 m, is 50 cm, its wetted perimeter is
Options- A. ?
- B.
- C.
- D.
- E.
Discuss
- 5. Pick up the correct statement from the following :
Options- A. Indore method of composting involves decomposition under aerobic conditions
- B. Bangalore method of composting involves decomposing under anaerobic conditions
- C. Fully stabilised refuse by the Bangalore method of compositing is a powdery mass called humus
- D. all of these. Discuss
- 6. Hydraulic mean radius is
Options- A. mean radius of sewer
- B. difference in heads between two points in circular pipes
- C. mean of radii in a pipe line of varying cross-sections
- D. cross-sectional area/wetted perimeter. Discuss
- 7. A sewer running partially full and hurried with back filled, fails in compression due to
Options- A. weight of the pipe
- B. weight of the back fill
- C. superimposed traffic loads
- D. all the above. Discuss
- 8. In septic tanks,
Options- A. free board of 0.3 m may be provided
- B. the baffles or tees are extended up to top level of scum
- C. the clear space between the baffle top and covering slab is about 7.5 cm
- D. the inlet is kept 30 cm below the sewage line and outlet is kept at a level 40% depth of the sewage
- E. all the above. Discuss
- 9. To prevent settling down of sewage both at the bottom and on the sides of a large sewer, self-cleaning velocity recommended for Indian conditions, is
Options- A. 0.50 m/sec
- B. 0.60 m/sec
- C. 0.70 m/sec
- D. 0.75 m/sec
- E. 1.0 m/sec. Discuss
- 10. The sewer pipe which carries sewage from a building for immediate disposal is
Options- A. house sewer
- B. lateral sewer
- C. intercepting sewer
- D. main sewer. Discuss
Waste Water Engineering problems
Search Results
Correct Answer: less than the rate of water supply
Correct Answer: sewage
Correct Answer: three to four hours
Correct Answer:
Correct Answer: all of these.
Correct Answer: cross-sectional area/wetted perimeter.
Correct Answer: all the above.
Correct Answer: all the above.
Correct Answer: 0.75 m/sec
Correct Answer: house sewer
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.