logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Hydraulics Comments

  • Question
  • For a most economical trapezoidal open channel, the half of the top width must be equal to


  • Options
  • A. the bed width
  • B. one sloping side
  • C. the depth of flow
  • D. None of these.

  • Correct Answer
  • one sloping side 


  • Hydraulics problems


    Search Results


    • 1. A stepped notch is a combination of

    • Options
    • A. rectangular notches of different sizes
    • B. triangular notches of different sizes
    • C. rectangular and triangular notches
    • D. all the above.
    • Discuss
    • 2. In steady flow, which one of the following changes with time

    • Options
    • A. velocity
    • B. pressure
    • C. density
    • D. none of these.
    • Discuss
    • 3. The unit of the viscosity is

    • Options
    • A. kg sec/m2
    • B. Newton sec per m2
    • C. Newton-sec2/m3
    • D. m2 per sec.
    • Discuss
    • 4. In a two dimensional flow if the components of the velocity are u = ax ; v = by, the point where no motion occurs, is known as

    • Options
    • A. critical point
    • B. neutral point
    • C. stagnation point
    • D. stationary point
    • E. none of these.
    • Discuss
    • 5. An orifice is called a large orifice if water head, is

    • Options
    • A. twice the diameter of the orifice
    • B. thrice the diameter of the orifice
    • C. four times the diameter of the orifice
    • D. five times the diameter of the orifice.
    • Discuss
    • 6. The shape of fire hose nozzle is generally kept

    • Options
    • A. divergent
    • B. convergent
    • C. convergent divergent
    • D. cylindrical.
    • Discuss
    • 7. The line joining the points to which the liquid rises in vertical piezometer tubes fitted at different cross-sections of a conduit, is known as

    • Options
    • A. hydraulic gradient
    • B. piezometric line
    • C. pressure grade line
    • D. hydraulic grade line
    • E. all the above.
    • Discuss
    • 8. The imaginary line drawn such that the tangents at its all points indicate the direction of the velocity of the fluid particles at each point, is called

    • Options
    • A. path line
    • B. stream line
    • C. potential line
    • D. streak line.
    • Discuss
    • 9. The most efficient channel section, is

    • Options
    • A. semi-circular
    • B. rectangular
    • C. triangular
    • D. half hexagon in the form of trapezoid.
    • Discuss
    • 10. An open container filled with water is moved vertically downward with a uniform linear acceleration. The pressure at its bottom will be

    • Options
    • A. greater than static pressure
    • B. equal to static pressure
    • C. lesser than static pressure
    • D. none of these.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment