logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Applied Mechanics Comments

  • Question
  • A projectile is fired with a velocity of 100.3 m/sec. at an elevation of 60°. The velocity attained by the projectile when it is moving at a height of 100 m, is


  • Options
  • A. 70 m/sec.
  • B. 75 m/sec.
  • C. 80 m/sec.
  • D. 85 m/sec.
  • E. 90 m/sec.

  • Correct Answer
  • 90 m/sec. 


  • Applied Mechanics problems


    Search Results


    • 1. The following statement is one of the laws of Dynamic friction

    • Options
    • A. The force of friction always acts in a direction opposite to that in which a body is moving
    • B. The magnitude of the kinetic friction bears a constant ratio to the normal reaction between two surfaces. The ratio being slightly less than that in the case of limiting friction
    • C. For moderate speeds the force of friction remains constant but decreases slightly with the increase of speed
    • D. all the above.
    • Discuss
    • 2. A 50 kg boy climbs up a 8 m rope in gymnasiam in 10 sec. The average power developed by the boy is approximately

    • Options
    • A. 400 watts
    • B. 500 watts
    • C. 4000 watts
    • D. none of these.
    • Discuss
    • 3. The ratio of the reactions RA and RB of a simply supported beam shown in below figure is

    • Options
    • A. 0.50
    • B. 0.40
    • C. 0.67
    • D. 1.00
    • E. 1.50
    • Discuss
    • 4. Pick up the correct statement from the following for the structure shown in below figure.

    • Options
    • A. The horizontal reaction at A is 23t ?
    • B. The horizontal reaction at C is 23t ?
    • C. The vertical reaction at A is zero
    • D. The vertical reaction at C is 2 t ?
    • E. All the above.
    • Discuss
    • 5. M.I. of a thin ring (external diameter D, internal diameter d) about an axis perpendicular to the plane of the ring, is

    • Options
    • A. (D4 + d4)
    • B. (D4 - d4)
    • C. (D4 + d4)
    • D. (D4 x d4).
    • Discuss
    • 6. The velocity of a moving body, is

    • Options
    • A. a vector quantity
    • B. a scalar quantity
    • C. a scalar as well as a vector quantity
    • D. none of these.
    • Discuss
    • 7. For lifting a load of 50 kg through a distance of 2.5 cm, an effort of 12.5 kg is moved through a distance of 40 cm. The efficiency of the lifting machine, is

    • Options
    • A. 60%
    • B. 65%
    • C. 70%
    • D. 75%.
    • Discuss
    • 8. For maximum range of a projectile, the angle of projection should be

    • Options
    • A. 30°
    • B. 45°
    • C. 60°
    • D. none of these.
    • Discuss
    • 9. The velocity ratio of the differential wheel and axle is

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 10. The ratio of the ranges on the inclined plane with motion upward and with motion downward for a given velocity, angle of projection will be

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment