logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Soil Mechanics and Foundation Engineering Comments

  • Question
  • Pick up the correct statement from the following:


  • Options
  • A. Isotropic consolidation of clay can be obtained in the triaxial apparatus under equal all-round pressure.
  • B. If the present effective stress is the maximum to which the clay has ever been subjected, it is called normally consolidated clay
  • C. If the present effective stress in the past was more than present effective stress, it is called over-consolidated clay
  • D. All the above.

  • Correct Answer
  • All the above. 


  • Soil Mechanics and Foundation Engineering problems


    Search Results


    • 1. Fundamental relationship between dry density (?d), bulk density (?) and water content (?), is :

    • Options
    • A. ? =
    • B. ?d =
    • C. ? =
    • D. ? =
    • Discuss
    • 2. Soil classification of composite soils, exclusively based on the particle size distribution, is known

    • Options
    • A. particle classification
    • B. textural classification
    • C. High Way Research Board classification
    • D. unified soil classification.
    • Discuss
    • 3. If W1, W2, W3 and W4 are the sequential weights obtained during observations in pycnometer method for determining water content, the formula to be used, is

    • Options
    • A. W =
    • B. W =
    • C. W =
    • D. W =
    • Discuss
    • 4. The ultimate bearing capacity of a soil, is

    • Options
    • A. total load on the bearing area
    • B. safe load on the bearing area
    • C. load at which soil fails
    • D. load at which soil consolidates.
    • Discuss
    • 5. The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2, the coefficient of compressibility is

    • Options
    • A. 0.01
    • B. 0.02
    • C. 0.05
    • D. 0.001
    • Discuss
    • 6. The plasticity index is the numerical difference between

    • Options
    • A. liquid limit and plastic limit
    • B. plastic limit and shrinkage limit
    • C. liquid limit and shrinkage limit
    • D. none of these.
    • Discuss
    • 7. The minimum centre to centre distance of friction piles of 1 m diameter, is

    • Options
    • A. 2 m
    • B. 2 m to 3 m
    • C. 3 m to 4 m
    • D. 5 m
    • Discuss
    • 8. Coulomb's wedge theory assumes that

    • Options
    • A. back fill is dry, cohesionless, homogeneous and isotropic
    • B. slip surface is the plane which passes through the heel of the wall
    • C. sliding wedge itself acts as a rigid body and the value of earth pressure is obtained by considering the limiting equilibrium of the wedge
    • D. position and direction of the resultant earth pressure, are known
    • E. all the above.
    • Discuss
    • 9. A critical hydraulic gradient may occur when

    • Options
    • A. flow is in upward direction
    • B. seepage pressure is in upward direction
    • C. effective pressure is zero
    • D. all the above.
    • Discuss
    • 10. In active state of plastic equilibrium in a non cohesive soil with horizontal ground surface

    • Options
    • A. major principal stress is horizontal
    • B. minor principal stress is vertical
    • C. major principal stress is vertical
    • D. minor and major principal stresses are equally inclined to horizontal.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment