If 50 m point of a 100 m tape is 50 cm off line, and 50 m sections are straight,

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Civil Engineering ‣ Surveying Comments

Question
If 50 m point of a 100 m tape is 50 cm off line, and 50 m sections are straight, an error is generated equal to
Options
A.
B.
C.
D. .

Correct Answer

Surveying problems

Search Results

1. The angle of intersection of a curve is the angle between
Options
A. back tangent and forward tangent
B. prolongation of back tangent and forward tangent
C. forward tangent and long chord
D. back tangent and long chord.

2. While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displacement of the end of the ray in plan from the true position will be
Options
A. 0.02 cm
B. 0.15 cm
C. 02 cm
D. 0.1 cm

3. For taking offsets with an optical square on the right hand side of the chain line, it is held
Options
A. by right hand upside down
B. by left hand upright
C. by right hand upright
D. by left hand up side down.

4. The conventional sign shown in below figure represents a
Options
A. bridge carrying railway below road
B. bridge carrying road below railway
C. bridge carrying road and railway at the same level
D. a level crossing.

5. The back staff reading on a B.M. of R.L. 500.000 m is 2.685 m. If foresight reading on a point is 1.345 m, the reduced level of the point, is
Options
A. 502.685 m
B. 501.345 m
C. 501.340 m
D. 504.030 m
E. 502.585 m.

9. Staff readings on pegs x and y from X station are 1.755 m and 2.850 m, and from station Y on staff head at Y and X are 0.655 m and 1.560 m. If reduced level of X is 105.5 m, the reduced level of Y is
Options
A. 104.0 m
B. 104.5 m
C. 105.0 m
D. 105.5 m

Comments

More in Civil Engineering: