logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Surveying Comments

  • Question
  • The line normal to the plumb line is known as


  • Options
  • A. horizontal line
  • B. level line
  • C. datum line
  • D. vertical line.

  • Correct Answer
  • level line 


  • Surveying problems


    Search Results


    • 1. The reduced level of a floor is 99.995 m, the staff reading on the floor is 1.505 m. If the inverted staff reading against the roof is 1.795 m, the floor level below the slab, is

    • Options
    • A. 3.290 m
    • B. 3.300 m
    • C. 3.275 m
    • D. 2.790 m
    • Discuss
    • 2. If F is the pull applied at the ends of tape in kg, l is the length of tape between end marks in metres, w is the weight of the tape in kg per metre run, then sag correction

    • Options
    • A.
    • B.
    • C.
    • D. .
    • Discuss
    • 3. If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, prismoidal correction for a level section is

    • Options
    • A. D/2m(h1 - h2)
    • B. D/3m(h1 - h2)
    • C. D/6m(h1 - h2)2
    • D. D/6m(h1 - h2)3
    • E. D/6m(h1 + h2)2
    • Discuss
    • 4. The additional lines which are measured to show the correctness of the chain surveying are called:

    • Options
    • A. check clines
    • B. proof lines
    • C. tie lines
    • D. all of these.
    • Discuss
    • 5. The bearing of lines OA and OB are 16° 10' and 332° 18', the value of the included angle BOA is

    • Options
    • A. 316° 10'
    • B. 158° 28'
    • C. 348° 08'
    • D. 43° 52'
    • Discuss
    • 6. Planimeter is used for measuring

    • Options
    • A. volume
    • B. area
    • C. contour gradient
    • D. slope angle
    • E. none of these
    • Discuss
    • 7. Resolving power of a telescope depends on

    • Options
    • A. the diameter of the aperture
    • B. the pupil aperture of the eye
    • C. the diameter of the object glass
    • D. all the above.
    • Discuss
    • 8. The included angles of a theodolite traverse, are generally measured

    • Options
    • A. clockwise from the forward station
    • B. anti-clockwise from the back station
    • C. anti-clockwise from the forward station
    • D. clockwise from the back station.
    • Discuss
    • 9. If deflection angles are measured in a closed traverse, the difference between the sum of the right-hand and that of the left hand angles should be equal to

    • Options
    • A. 0°
    • B. 90°
    • C. 180°
    • D. 360°
    • Discuss
    • 10. In a perfect prismatic compass

    • Options
    • A. magnetic axis and geometric axis of the needle coincide
    • B. ends of the needle and pivot are in same vertical and horizontal planes
    • C. pivot is vertically over the centre of the graduated circle
    • D. needle is always kept sensitive
    • E. all the above.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment