logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Building Materials Comments

  • Question
  • Pick up the correct statement from the following:


  • Options
  • A. The low voltage porcelain is prepared by wet process
  • B. The high voltage porcelain is prepared by dry process
  • C. The low voltage porcelain is prepared by dry process
  • D. None of the above.

  • Correct Answer
  • The low voltage porcelain is prepared by dry process 


  • Building Materials problems


    Search Results


    • 1. The commonly used raw material in the manufacture of cement, is

    • Options
    • A. slate
    • B. sand stone
    • C. lime stone
    • D. basalt.
    • Discuss
    • 2. Pick up the correct statement from the following:

    • Options
    • A. Rust is due to formation of oxides
    • B. Cast iron oxidises less
    • C. Steel oxidises most
    • D. Wrought iron oxidises moderately
    • E. All the above.
    • Discuss
    • 3. Plywood is normally available

    • Options
    • A. 1 mm thick
    • B. 2 mm thick
    • C. 2 to 3 mm thick
    • D. 3 mm to 4 mm thick.
    • Discuss
    • 4. The colour of statuary marble used for sculptor's work, is

    • Options
    • A. red
    • B. blue
    • C. white
    • D. green
    • E. yellow
    • Discuss
    • 5. Acrylic sheets

    • Options
    • A. possess 10 to 17 times greater breakage resistance than that of glass of equivalent thickness
    • B. are generally unaffected by most household detergents
    • C. possess the light transmission rate of 93%
    • D. are available in various shapes
    • E. all the above.
    • Discuss
    • 6. French polish is

    • Options
    • A. oil paint
    • B. distemper
    • C. spirit varnish
    • D. none to these.
    • Discuss
    • 7. The harmonious mixing of the clay ingredients, is known as

    • Options
    • A. weathering
    • B. blending
    • C. tempering
    • D. None of these.
    • Discuss
    • 8. Ground glass

    • Options
    • A. is made by grinding its one side
    • B. is made by melting powdered glass paints surface
    • C. is used for getting light without transparency
    • D. all the above.
    • Discuss
    • 9. Pick up the correct statement from the following:

    • Options
    • A. Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38%
    • B. The bulking of fine sand is more than that of coarse sand
    • C. If the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing
    • D. The volume of fully saturated sand equals that of dry sand
    • E. All the above.
    • Discuss
    • 10. A prime coat is given to steel work with

    • Options
    • A. an oxide of iron paint
    • B. a mixture of white lead and lead paint
    • C. a special paint
    • D. cement paint.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment