logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Building Materials Comments

  • Question
  • The steel used for the manufacture of rails, is


  • Options
  • A. Bessemer steel
  • B. mild steel
  • C. cast steel
  • D. stainless steel.

  • Correct Answer
  • Bessemer steel 


  • Building Materials problems


    Search Results


    • 1. The portion of the brick cut across its width and having its length equal to that of a full brick, is known as

    • Options
    • A. closer
    • B. queen closer
    • C. king closer
    • D. prince closer
    • E. none of these.
    • Discuss
    • 2. According to IS 399-1963, the weight of the timber is specified at

    • Options
    • A. 8% moisture content
    • B. 10% moisture content
    • C. 12% moisture content
    • D. 14% moisture content.
    • Discuss
    • 3. Lime putty

    • Options
    • A. is made from hydraulic lime
    • B. is made by adding lime to water
    • C. can be used only upto three days
    • D. may be obtained from drying lime water mix passing through IS sieve No. 300
    • E. all of above.
    • Discuss
    • 4. The most important constituent of an oil paint, is

    • Options
    • A. thinner
    • B. vehicle
    • C. pigment
    • D. base
    • E. all the above.
    • Discuss
    • 5. To retard the initial setting time of cement, the compound responsible, is

    • Options
    • A. Tricalcium silicate
    • B. Gypsum
    • C. Di-calcium silicate
    • D. Tri calcium aluminate.
    • Discuss
    • 6. Plaster of Paris is obtained by calcining

    • Options
    • A. bauxite
    • B. gypsum
    • C. kankar
    • D. lime stone
    • E. none of these.
    • Discuss
    • 7. Pick up the metal refractory from the following:

    • Options
    • A. Molyblendum
    • B. Tungsten
    • C. Zicronium
    • D. All of these.
    • Discuss
    • 8. The method of addition polymerization is used for obtaining:

    • Options
    • A. polythylene
    • B. polypropylene
    • C. polyvinylchloride
    • D. polystyrene
    • E. All of these.
    • Discuss
    • 9. Asphalt is obtained from

    • Options
    • A. petroleum distillation
    • B. bitumen distillation
    • C. plastic distillation
    • D. none of these.
    • Discuss
    • 10. According to ISI, bitumen is classified into

    • Options
    • A. 2 grades
    • B. 4 grades
    • C. 6 grades
    • D. 8 grades.
    • E. 10 grades.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment