logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Building Materials Comments

  • Question
  • Pick up the correct statement from the following:


  • Options
  • A. Roasting is not necessary if iron ore is an oxide
  • B. Impurities float on the molten iron as slag
  • C. The slag contains lime about 45%
  • D. The molten iron is made to run, in a long channel formed in sand called 'sow'
  • E. All the above.

  • Correct Answer
  • All the above. 


  • Building Materials problems


    Search Results


    • 1. Upto a maximum of 72% of iron, is available in

    • Options
    • A. Magnetite
    • B. Red haemetite
    • C. Limonite
    • D. Siderite
    • E. Iron pyrites.
    • Discuss
    • 2. Duco paints are

    • Options
    • A. plastic paints
    • B. cellulose paints
    • C. emulsion paints
    • D. bituminous paints
    • E. oil paints.
    • Discuss
    • 3. Pick up the correct statement from the following:

    • Options
    • A. Melamine is obtained from calcium carbide
    • B. Formaldehyde is prepared synthetically from methane
    • C. The melamine when reacted with formaldehyde forms the melamine-formaldehyde resin
    • D. The plastics made from melamine formaldehyde resin, are used for electrical insulators
    • E. All the above.
    • Discuss
    • 4. Pick up the compound responsible for early strength of cement from the following:

    • Options
    • A. Tetra-calcium alumino-ferrite
    • B. Tricalcium silicate
    • C. Tricalcium aluminate
    • D. Dicalcium silicate.
    • Discuss
    • 5. Pick up the correct statement from the following:

    • Options
    • A. Blistering may be cured by applying water paint finished with oil paint dried with a little copal varnish
    • B. Cracked paints may be cured by removing paint and giving a fresh coat of paint
    • C. Crawling paints may be cured by sand preparing the surface and giving a fresh coat with plenty of turps
    • D. All the above.
    • Discuss
    • 6. The melting point of silica is :

    • Options
    • A. 1570°C
    • B. 1630°C
    • C. 1730°C
    • D. 1850°C.
    • Discuss
    • 7. The yield strength and tensile strength of low carbon steel may be improved by the addition of

    • Options
    • A. manganese
    • B. chromium
    • C. nickel
    • D. venadium
    • E. tungsten.
    • Discuss
    • 8. Acrylic is the name of

    • Options
    • A. cellulose resin
    • B. alkyd resin
    • C. methyl metha crylate
    • D. cumarone-indene.
    • Discuss
    • 9. Pick up the correct statement from the following:

    • Options
    • A. Rusting is caused due to combined action of air, moisture and carbon dioxide
    • B. During rusting, first ferrous bicarbonates are formed
    • C. On further oxidation ferrous bicarbonates get converted to ferric bicarbonates
    • D. Ultimately hydrated ferric oxide is formed during rusting and carbon dioxide gets liberated
    • E. All the above.
    • Discuss
    • 10. Plastic asphalt is

    • Options
    • A. used as a water proofing layer over roof
    • B. a mixture of cement and asphalt
    • C. a natural asphalt
    • D. a refinery product.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment