Discussion
Home ‣ Civil Engineering ‣ Building Materials Comments
- Question
Duco paints are
Options- A. plastic paints
- B. cellulose paints
- C. emulsion paints
- D. bituminous paints
- E. oil paints.
- Correct Answer
- oil paints.
- 1. Pick up the correct statement from the following:
Options- A. Melamine is obtained from calcium carbide
- B. Formaldehyde is prepared synthetically from methane
- C. The melamine when reacted with formaldehyde forms the melamine-formaldehyde resin
- D. The plastics made from melamine formaldehyde resin, are used for electrical insulators
- E. All the above. Discuss
- 2. Pick up the compound responsible for early strength of cement from the following:
Options- A. Tetra-calcium alumino-ferrite
- B. Tricalcium silicate
- C. Tricalcium aluminate
- D. Dicalcium silicate. Discuss
- 3. Pick up the correct statement from the following:
Options- A. Blistering may be cured by applying water paint finished with oil paint dried with a little copal varnish
- B. Cracked paints may be cured by removing paint and giving a fresh coat of paint
- C. Crawling paints may be cured by sand preparing the surface and giving a fresh coat with plenty of turps
- D. All the above. Discuss
- 4. Spirit varnish generally consists of
Options- A. oil, wax and resin
- B. alcohol, wax and turpentine
- C. pigment and synthetic resin
- D. spirit and shellac
- E. none of these. Discuss
- 5. Laterite is found in
Options- A. U.P.
- B. Punjab
- C. West Bengal
- D. Kerala. Discuss
- 6. Upto a maximum of 72% of iron, is available in
Options- A. Magnetite
- B. Red haemetite
- C. Limonite
- D. Siderite
- E. Iron pyrites. Discuss
- 7. Pick up the correct statement from the following:
Options- A. Roasting is not necessary if iron ore is an oxide
- B. Impurities float on the molten iron as slag
- C. The slag contains lime about 45%
- D. The molten iron is made to run, in a long channel formed in sand called 'sow'
- E. All the above. Discuss
- 8. The melting point of silica is :
Options- A. 1570°C
- B. 1630°C
- C. 1730°C
- D. 1850°C. Discuss
- 9. The yield strength and tensile strength of low carbon steel may be improved by the addition of
Options- A. manganese
- B. chromium
- C. nickel
- D. venadium
- E. tungsten. Discuss
- 10. Acrylic is the name of
Options- A. cellulose resin
- B. alkyd resin
- C. methyl metha crylate
- D. cumarone-indene. Discuss
Building Materials problems
Search Results
Correct Answer: All the above.
Correct Answer: Tricalcium silicate
Correct Answer: All the above.
Correct Answer: spirit and shellac
Correct Answer: U.P.
Correct Answer: Magnetite
Correct Answer: All the above.
Correct Answer: 1730°C
Correct Answer: venadium
Correct Answer: methyl metha crylate
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.