Discussion
Home ‣ Civil Engineering ‣ Building Materials Comments
- Question
Which one of the following is an air binding material?
Options- A. Gypsum
- B. Acid-resistant cement
- C. Quick lime
- D. All of these.
- Correct Answer
- All of these.
- 1. Apiece of sawn timber whose cross-sectional dimensions exceed 5 cm, in one direction and 20 cm in the other direction, is called a
Options- A. cant
- B. deal
- C. baulk
- D. strip. Discuss
- 2. Cement is said to be of good quality if
Options- A. its colour is not greenish grey
- B. one feels cool by thrusting one's hand in the cement bag
- C. it is not smooth when rubbed in between fingers
- D. a handful of cement thrown into a bucket of water does not float
- E. none of these. Discuss
- 3. The lime which contains mainly calcium oxide and slacks with water, is
Options- A. fat lime
- B. quick lime
- C. hydraulic lime
- D. poor lime
- E. none of these. Discuss
- 4. Mastic asphalt is generally used for
Options- A. damp proof course
- B. water proof layer
- C. partition walls
- D. both (a) and (b). Discuss
- 5. A good brick earth should contain :
Options- A. about 20% to 30% of alumina
- B. about 50% to 60% of silica
- C. not more than 5% of lime
- D. about 5 to 6% of oxide of lime
- E. All the above. Discuss
- 6. If P is the percentage of water required for normal consistency, water to be added for determination of initial setting time, is
Options- A. 0.70 P
- B. 0.75 P
- C. 0.80 P
- D. 0.85 P
- E. 0.90 P. Discuss
- 7. Bessemer process is used for the manufacture of
Options- A. Pig iron
- B. cast iron
- C. Wrought iron
- D. Steel. Discuss
- 8. Smith's test of stones is performed to find out
Options- A. the presence of soluble matter of stone
- B. the compressive strength of the stone
- C. the hardness of the stone
- D. the toughness of the stone. Discuss
- 9. Pick up the correct statement from the following:
Options- A. The phenol is carbolic acid
- B. The phenol is either extracted from coal-tar or prepared from benzene
- C. Phenol reacts with formaldehyde, to form phenol formaldehyde resin
- D. The plastics prepared from phenol-formaldehyde are used for paints, varnishes, w.c. seats
- E. All the above. Discuss
- 10. Pick up the correct statement from the following:
Options- A. Solder material is an alloy which melts at a temperature above 400°C
- B. Brazing is done at temperature above 600°C to 1100°C
- C. Brazing joint is stronger than the solder joint
- D. all the above. Discuss
Building Materials problems
Search Results
Correct Answer: baulk
Correct Answer: none of these.
Correct Answer: quick lime
Correct Answer: both (a) and (b).
Correct Answer: All the above.
Correct Answer: 0.85 P
Correct Answer: Steel.
Correct Answer: the presence of soluble matter of stone
Correct Answer: All the above.
Correct Answer: all the above.
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.