Discussion
Home ‣ Mechanical Engineering ‣ Strength of Materials Comments
- Question
The bending stress in abeam is __________ bending moment.
Options- A. equal to
- B. less than
- C. more than
- D. directly proportional to
- Correct Answer
- directly proportional to
- 1. The Rankine's formula holds good for
Options- A. short columns
- B. long columns
- C. both short and long columns
- D. weak columns Discuss
- 2. The limit of eccentricity for no tensile conditions for a column of circular section of diameter (d) is
Options- A. d/4
- B. d/8
- C. d/12
- D. d/16 Discuss
- 3. The critical neutral axis of a reinforced cement concrete beam is based on the principle that the neutral axis is situated at the centre of gravity of a given section.
Options- A. True
- B. False Discuss
- 4. When a material is loaded within elastic limit, the material will regain its shape and size when the load is removed.
Options- A. Agree
- B. Disagree Discuss
- 5. The distance between the centres of rivets in adjacent rows of zig-zag riveted joint, is called back pitch.
Options- A. True
- B. False Discuss
- 6. Shear modulus is the ratio of
Options- A. linear stress to linear strain
- B. linear stress to lateral strain
- C. volumetric strain to linear strain
- D. shear stress to shear strain Discuss
- 7. The bending moment of a cantilever beam of length l and carrying a uniformly distributed load of w per unit length is __________ at the free end.
Options- A. zero
- B. wl/4
- C. wl/2
- D. wl Discuss
- 8. The shear force at the ends of a simply supported beam carrying a uniformly distributed load of w per unit length is
Options- A. zero at its both ends
- B. wl at one end and - wl at the other end
- C. wl/2 at one end and - wl/2 at the other end
- D. wl2/2 at one end and - wl2/2 at the other end Discuss
- 9. In case of eccentrically loaded struts __________ is preferred.
Options- A. solid section
- B. hollow section
- C. composite section
- D. reinforced section Discuss
- 10. In leaf springs, the maximum bending stress developed in the plates is (where W = Load acting on the spring, l = Span of the spring, n = Number of plates, b = Width of plates, and t = Thickness of plates)
Options- A.
- B.
- C.
- D.
Discuss
Strength of Materials problems
Search Results
Correct Answer: both short and long columns
Correct Answer: d/8
Correct Answer: True
Correct Answer: Agree
Correct Answer: False
Correct Answer: shear stress to shear strain
Correct Answer: zero
Correct Answer: wl/2 at one end and - wl/2 at the other end
Correct Answer: composite section
Correct Answer:
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.