Discussion
Home ‣ Computer Science ‣ Windows 2000 Server Comments
- Question
You are the administrator of Windows 2000 Server computer. Your computer has a span volume that consists of areas on three physical hard disks on the server. The three disks support hot swapping. You regularly backup the span volume by using windows backup. One of the disk fail, you replace the disk with a new un-partitioned disk. You want to recover the span volume and disk data as soon as possible. What should you do?
Options- A. Extend the span volume to include the new disk, rescan the disk
- B. Extend the span volume to include the new disk, shut down and restart the server, use windows backup to restore the data
- C. Re scan the disk, format the span volume. Use windows back up to restore the data
- D. Re scan the disk, extend the span volume to include the new disk. Shut down and restart the server, use windows backup to restore the new data
- E. Re scan the disk, remove the span volume and create a new span volume that includes the new disk. Format the span volume, use Windows back up to restore the data
- Correct Answer
- Re scan the disk, remove the span volume and create a new span volume that includes the new disk. Format the span volume, use Windows back up to restore the data
- 1. You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer. Your Windows 2000 Professional client computers can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit. "The server on which the printer resides does not have a suitable HP LaserJet printer driver installed". You want the printer driver to be installed automatically on the Windows NT Workstation computers. What should you do?
Options- A. Copy the Windows NT 4.0 Printer Drivers to the Net logon shared folders on all Windows NT Server 4.0 computers still configured as BDCs
- B. Copy the Windows NT 4.0 printer drivers to the Net logon shared folder on the PDC emulator
- C. Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000
- D. Copy the Windows NT 4.0 printer drivers to the Winnt\System32\ pri liter s\dri vers folder on the Windows 2000 print server
- E. None of above Discuss
- 2. You install Internet Information Services 5.0 on a computer running Windows 2000 Server. You create two new department web sites for the Human Resources and Sales departments. You use host headers to define these two new sites. You stop the Sales web site while a developer updates the contents of the site. If a user attempts to access the Sales site while it is stopped, what response will the user receive?
Options- A. The user will be redirected to an alternate default page for the Sales site's home directory
- B. The user will be redirected to the Default Web site home page
- C. The user will receive a 403.2 -Read Access Forbidden error message
- D. The user will receive a 404 - File Not Found error message
- E. None of above Discuss
- 3. You configure your Windows 2000 Server as a print server. You install a second PnP Network adapter to improve the performance. The first adapter uses IRQ11, and the second adapter uses IRQ5. The server is now unable to print to print devices connected to a non-PnP LPT2 port adapter. You want to continue to use the print devices connected to your print server. What should you do?
Options- A. Use device manager to change the IRQ for LPT1 to IRQ10
- B. Use device manager to change the IRQ for LPT2 to IRQ7
- C. Edit the CMOS setting of the servers BIOS to reserve IRQ7 for non-PnP devices
- D. Edit the CMOS setting of the servers BIOS to reserve IRQ5 for non-PnP devices
- E. None of above Discuss
- 4. Your network contains NetWare 4.0 Servers. You have successfully installed Client Service for NetWare on Windows 2000 Professional computers, and Gateway Service for NetWare on Windows 2000 Server Computers. You recently added a new Windows 2000 Server computer to the network and installed Gateway Service for NetWare on it. However, the server is unable to connect to any NetWare servers. What should you do on the new Windows 2000 Server computer to resolve this problem?
Options- A. Enable NWLink NetBIOS
- B. Configure the NWLink IPX/SPX/ NetBIOS Compatible Transport Protocol to use the correct Ethernet frame type
- C. Install RIP routing for IPX
- D. Install the SAP Agent
- E. None of above. Discuss
- 5. Your network uses TCP/IP as the only network protocol. Devices on the network are configured to use IP address from the private 10.0.0.0 range. All the client computers on the network runs Windows 2000 Professional. The network includes Windows 2000 Server computers and UNIX servers. User's print jobs are sent to shared printers on a Windows 2000 Server computer named PrintServ that directs the print jobs to print devices attached directly to the network. You have a high-capacity print device that is attached to one of the UNIX servers. The UNIX computer uses the LPR printing protocol, and it's IP address is 10.1.1.99. The name of the printer queue is GIANT. You want users to be able to connect to this printer from their computers. What should you do?
Options- A. Install Microsoft Print Services for Unix on PrintServ. Create a network printer on users' computers, and specify that the printer URL is LPR://10.1.1.99/ GIANT
- B. Install Microsoft Print Services for Unix on users* Computers. Create a network printer, and specify that the printer name is \\10.1.1.99\GIANT
- C. Create a network printer on PrintServ, and specify that the printer name is \\16.1.1.99\GIANT. Share this printer and connect to it from users computers
- D. Create a local printer on PrintServ. Create a new TCP/IP port for an LPR server at address 10.1.1.99 with a queue name of GIANT. Share this printer and connect to it from users' computers
- E. None of above Discuss
- 6. You want to improve the TCP transmission speed of a Windows 2000 Server computer. You also want to remove an unused registry key. You use Regedit32 to edit the registry of the Windows 2000 Server. You insert a value in the registry named TCPWindowSize, and you remove the unused key. You restart the computer, but the computer stops responding before the logon screen appears. You want to return the computer to its previous configuration. What should you do?
Options- A. Restart the computer in safe mode. Then restart the computer again
- B. Restart the computer by using the Recovery Console. Run the Fixboot c: command, and then run the Exit command
- C. Restart the computer by using the Recovery Console. Run the enable winlogon service_auto_start command, and then run the Exit command
- D. Restart the computer by using the last known good configuration
- E. None of above Discuss
- 7. How can you recreate the PTR record in your Windows 2000 DNS server from you Windows 2000 client?
Options- A. Run ipconfig /registerdns from the client
- B. Run ipconfig all /registerdns from the DNS server
- C. Start the DNS Dynamic service on your client computer
- D. Create a host file with the #DYNAMIC command on the client computer
- E. None of above Discuss
- 8. You are the administrator of a Windows 2000 domain that has three domain controllers. Each day, you use Windows Backup to perform full backups of each domain controller. You run a script to make changes to account information in Active Directory. As a result of errors in the script, the incorrect user accounts are modified. Active Directory replication then replicates the changes to the other two domain controllers. You want to revert Active Directory to the version that was backed up the previous day. What should you do?
Options- A. On a single domain controller, use Windows Backup to restore the System State data. Shut down and restart the computer
- B. Shut down and restart a single domain controller in directory services restore mode. Use Windows Backup to restore the System State data. Run the Ntdsutil utility. Restart the computer
- C. Shut down, and restart a single domain controller by using the Recovery Console. Use Windows Backup to restore the System State data. Exit the Recovery Console. Restart the computer
- D. Shut down and restart each domain controller by using the Recovery Console. Use Windows Backup to restore the Sysvol folder. Exit the Recovery Console. Restart the computer
- E. None of above Discuss
- 9. You are a network administrator for your company. The company is currently configuring its branch offices with a Windows 2000 Server computer at each office. Each branch office has a technical-support department but not a network administrator. You want to configure the remote Windows 2000 Server computers so that whenever a new Microsoft driver becomes available, the branch offices are notified automaticaly when the administrator logs onto the server. What should you do?
Options- A. Install the Windows 2000 Resource Kit
- B. Install Windows critical update notification
- C. Configure system file checker to notify the branch offices
- D. Configure Windows file protection to notify the branch offices
- E. None of above Discuss
- 10. You are the administrator of a Windows 2000 Server computer. The server contains one network adapter and is a file and print server for critical company resources. You install a second network adpater in the server and connect it to the same network subnet as the first adapter. You want to ensure that the first adapter is used for all network traffic and the second adapter is used only if the first adapter fails or is disconnected from the network. You also want to ensure that the server always has network connectivity even if one network adapter fails. What should you do?
Options- A. Set the second adapters status to disable
- B. Configure the first adapter to use a TCP/IP metric of 100
- C. Configure the second adapter to use a TCP/IP metric of 25
- D. Configure the binding order on the second adapter to bind TCP/IP last
- E. None of above Discuss
Windows 2000 Server problems
Search Results
Correct Answer: Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000
Correct Answer: The user will be redirected to the Default Web site home page
Correct Answer: Edit the CMOS setting of the servers BIOS to reserve IRQ5 for non-PnP devices
Correct Answer: Configure the NWLink IPX/SPX/ NetBIOS Compatible Transport Protocol to use the correct Ethernet frame type
Correct Answer: Create a local printer on PrintServ. Create a new TCP/IP port for an LPR server at address 10.1.1.99 with a queue name of GIANT. Share this printer and connect to it from users' computers
Correct Answer: Restart the computer by using the last known good configuration
Correct Answer: Run ipconfig /registerdns from the client
Correct Answer: Shut down and restart a single domain controller in directory services restore mode. Use Windows Backup to restore the System State data. Run the Ntdsutil utility. Restart the computer
Correct Answer: Install Windows critical update notification
Correct Answer: Configure the second adapter to use a TCP/IP metric of 25
Comments
There are no comments.More in Computer Science:
Programming
Copyright ©CuriousTab. All rights reserved.