Discussion
Home ‣ Computer Science ‣ Windows 2000 Server Comments
- Question
Your Windows 2000 Server computer uses a non-Plug and Play ISA modem configured to use IRQ 5. You add a PCI modem and restart the computer. Device Manager reports an IRQ conflict between the two modems. Both modem are trying to use IRQ 5. You want to resolve the problem. What should you do?
Options- A. Use Device Manager to change the IRQ for the original modem to IRQ 9
- B. Use Device Manager to change the IRQ for the original modem to IRQ 10
- C. Edit the CMOS settings on the computer to reserve IRQ 5 for non-Plug and Play devices
- D. Edit the CMOS settings on the computer to reserve IRQ 10 for non-Plug and Play devices
- E. None Of above
- Correct Answer
- Edit the CMOS settings on the computer to reserve IRQ 5 for non-Plug and Play devices
- 1. You have configured a Group Policy Object (GPO) for the marketing oranization unit (OU) to prevent users from accessing My Network Places and from running System in Control Panel. You want the Managers Domain Local Group to be able to access My Network Places, but you still want to prevent them from running System in Control Panel. What should you do?
Options- A. Add the Managers group to the access control list of the GPO. Disable the permission of the managers group to read and apply the Group Policy
- B. Add the Managers group to the access control list of the GPO. Deny the permission of the managers group to read and apply the Group Policy
- C. Create a second GPO in the OU. Add the Managers group to the access control list. Allow the managers group to apply the Group Policy. Deny the Authenticated Users group permission to read and apply the Group Policy. Configure the new GPO to deny the ability to run system Control Policy Panel. Give the original GPO a higher priority than the new GPO
- D. Create a second GPO in the OU. Add the Managers group to the access control list. Allow the managers group to apply the Group Policy. Disable the Authenticated Users group permission to read and apply the Group Policy. Configure the new GPO to allow access to My Network Places. Give the original GPO a higher priority than the new GPO
- E. None of above Discuss
- 2. Your network consists of Windows 2000 file servers, Windows 2000 print servers, Windows 2000 professional computers, Windows 2000 file servers. You must prevent any unsigned drivers from being installed on any computer in your Windows 2000 network. What should you do?
Options- A. Configure a Group policy for the Domain that blocks all unsigned drivers
- B. Configure a Group policy for the Default Domain Controller to block all unsigned drivers
- C. Configure the Windows 2000 file servers, Windows 2000 print servers, Windows 2000 professional computers and Windows 2000 file servers to block unsigned drivers
- D. Do nothing, this is the default setting
- E. None of above Discuss
- 3. Bridges are ideally used in environments where there a number of well defined workgroups
Options- A. True
- B. False Discuss
- 4. Windows Naming Service (WINS)
Options- A. dynamically allocates IP addresses to client computers
- B. runs on Windows NT W/S
- C. resolves computer names to IP addresses
- D. Increases broadcast traffic
- E. None of the above Discuss
- 5. Which of the following statements about a local group account created by User Manager for Domains is true?
Options- A. The account can be added to global groups
- B. The account cannot be used in trusting domains
- C. The account is added to the Domain Users group automatically
- D. The account must be added to a local group to use domain resources
- E. None of the above Discuss
- 6. You install the Routing and Remote Access service on a Windows 2000 Server computer in your network. Your network is not directly connected to the Internet and uses the private IP address range 192.168.0.0. When you use Routing and Remote Access to dial in to the server, your computer connects successfully, but you are unable to access any resources. When you try to piiig servers by using their IP addresses, you receive the following message: "Request timed out." When you run the ipconfig command, it shows that your dial-up connection has been given the IP address 169.254.75.182. What should you do to resolve the problem?
Options- A. Configure the remote access server with the address of a DHCP server
- B. Authorize the remote access server to receive multiple addresses from a DHCP server
- C. Configure the remote access server to act as a DHCP Relay Agent
- D. Ensure that the remote access server is able to connect to a DHCP server that has a scope for its subnet
- E. None of above Discuss
- 7. You are the network administrator for your company. Mike Nash is a member of the Administration group, and Nate Sun is a member of the Intern group. Both groups are in the same domain. On the intranet server, the Administration group is placed in the Security group, and the Intern group is placed in the Nonsecurity group. The Security group is then granted Full Control permission for the Sales virtual directory. Nate needs to update new sales information that is located on the Sales virtual directory. What should you do so that Nate can perform this task?
Options- A. Enable Anonymous access for the intranet server
- B. Enable Anonymous access for the Sales virtual directory
- C. Remove Nate fmm the Intern group
- D. Make Nate a member of the Security group
- E. None of above Discuss
- 8. You are the administrator of a Windows 2000 Server computer that has one hard disk. This computer runs a custom application that writes a large number of small temporary files in a single directory to support request from client computers. To improve performance of the application, you add three new 100-GB SCSI disks to the server to hold these temporary files. You want to ensure that the application can use all 300 GB of space with a single drive letter. You also want to ensure the fastest possible performance when writing the temporary files. How should you configure the three disks?
Options- A. Convert all three disks to dynamic disks. Create a striped volume
- B. Convert all three disks to dynamic disks. Create a RAID-5 volume
- C. Create a single volume on each of the three disks. Format each volume as NTFS. Mount the roots of Disk 2 and Disk 3 in the root folder of Disk 1
- D. Create a single volume on Disk 1. Format the volume as NTFS. Extend the volume to create a spanned volume that includes the space on all three disks
- E. None of above Discuss
- 9. You are the administrator of a Windows 2000 Server computer that has FIVE hard disks. Four 100 GB hard disks on the server are configured as a single stripe volume. You want to reconfigure the fourth disk so that the volume is fault tolerant and has as much space possible available for storing data. You want to use only existing hardware. What should you do?
Options- A. Convert the disk to dynamic disk shut doWn and restart the server
- B. Backup the data on the stripe volume and delete the stripe volume. Create a raidS volume on the four disks, restore the data to the new raid5 volume
- C. Backup the data on the stripe volume and delete the stripe volume. Create a mirror volume, shut down and restart the server. Restore the data to new mirror volumes
- D. Backup the data on the stripe volume and delete the stripe
- E. None of above Discuss
- 10. Your network uses TCP/IP as the only network protocol. Devices on the network are configured to use IP address from the private 10.0.0.0 range. All the client computers on the network runs Windows 2000 Professional. The network includes Windows 2000 Server computers and UNIX servers. User's print jobs are sent to shared printers on a Windows 2000 Server computer named PrintServ that directs the print jobs to print devices attached directly to the network. You have a high-capacity print device that is attached to one of the UNIX servers. The UNIX computer uses the LPR printing protocol, and it's IP address is 10.1.1.99. The name of the printer queue is GIANT. You want users to be able to connect to this printer from their computers. What should you do?
Options- A. Install Microsoft Print Services for Unix on PrintServ. Create a network printer on users' computers, and specify that the printer URL is LPR://10.1.1.99/ GIANT
- B. Install Microsoft Print Services for Unix on users* Computers. Create a network printer, and specify that the printer name is \\10.1.1.99\GIANT
- C. Create a network printer on PrintServ, and specify that the printer name is \\16.1.1.99\GIANT. Share this printer and connect to it from users computers
- D. Create a local printer on PrintServ. Create a new TCP/IP port for an LPR server at address 10.1.1.99 with a queue name of GIANT. Share this printer and connect to it from users' computers
- E. None of above Discuss
Windows 2000 Server problems
Search Results
Correct Answer: Create a second GPO in the OU. Add the Managers group to the access control list. Allow the managers group to apply the Group Policy. Disable the Authenticated Users group permission to read and apply the Group Policy. Configure the new GPO to allow access to My Network Places. Give the original GPO a higher priority than the new GPO
Correct Answer: Configure the Windows 2000 file servers, Windows 2000 print servers, Windows 2000 professional computers and Windows 2000 file servers to block unsigned drivers
Correct Answer: True
Correct Answer: resolves computer names to IP addresses
Correct Answer: The account cannot be used in trusting domains
Correct Answer: Ensure that the remote access server is able to connect to a DHCP server that has a scope for its subnet
Correct Answer: Make Nate a member of the Security group
Correct Answer: Convert all three disks to dynamic disks. Create a striped volume
Correct Answer: Backup the data on the stripe volume and delete the stripe volume. Create a raidS volume on the four disks, restore the data to the new raid5 volume
Correct Answer: Create a local printer on PrintServ. Create a new TCP/IP port for an LPR server at address 10.1.1.99 with a queue name of GIANT. Share this printer and connect to it from users' computers
Comments
There are no comments.More in Computer Science:
Programming
Copyright ©CuriousTab. All rights reserved.