logo

CuriousTab

CuriousTab

Discussion


Home Computer Science Windows NT Comments

  • Question
  • You are setting up a network in a school. You need to network 5 computers for the file and printer sharing. You want to use some donated cable and Ethernet adapters. You identify the donated adapters as ARCnet coaxial network adapters and 10Base2 Ethernet network adapters. You install an Ethernet adapter in each of the 5 computers and connect the donated cable. The computers are NOT able to maintain reliable communication. You suspect that you are NOT using the correct type of coaxial cable. Which type of coaxial cable should you be using?


  • Options
  • A. RG-58 AU
  • B. RG-59 AU
  • C. RJ-11
  • D. RJ-45
  • E. None of the above

  • Correct Answer
  • RG-58 AU 


  • Windows NT problems


    Search Results


    • 1. You are installing a network interface card on a computer with the following configuration: a 5867133 CPU, 16MB or RAM, a 800-MB IDE hard disk, a parallel port configured as LPT1, and a serial port configured as COM1, which is currently used by a mouse. In addition to the IDE host adapter and the video card, the following devices have been installed on the computer's expansion bus: a modem on COM2, a SCSI host adapter for a CD-ROM drive, and a sound card. The SCSI hose adapter is using IRQ 5, and the sound card is using IRQ 11. The network interface card that you are installing supports the following choices for IRQ: 2, 3, 4, 5, 9,10 and 11. Which IRQ(s) could you use for the network interface card without creating an IRQ conflict with another device?

    • Options
    • A. 2
    • B. 4
    • C. 5
    • D. 10
    • E. None of the above
    • Discuss
    • 2. Why does a high number of broadcast messages adversely affect overall network performance?

    • Options
    • A. Each broadcast message requires an acknowledgement packet from every computer on the network
    • B. No computer on the network can transmit data until each broadcast message has been acknowledged by every computer on the network
    • C. Broadcast messages are automatically routed to every segment of a LAN
    • D. Every computer on the network must process each broadcast message
    • E. None of the above
    • Discuss
    • 3. You install Windows NT Server on a computer, making the computer a backup domain controller in an existing domain. After installation, you discover that you used the wrong domain name. What should you do?

    • Options
    • A. Change the domain name by using Control Panel
    • B. Modify the domain name in the Registry
    • C. Reinstall Windows NT Server
    • D. Change the domain name by using the Emergency Repair disk
    • Discuss
    • 4. In your company, 2 Ethernet Networks are connected with a router. All network connections run TCP/IP. Your new client computer can access only the computers on your side of the router. All other computers are able to access one another. What is the most likely cause of the problem?

    • Options
    • A. incorrect termination of the destination network
    • B. defective network adapter in the router
    • C. incorrect subnet mask on your client computer
    • D. malfunctioning repeater
    • E. None of the above
    • Discuss
    • 5. Assume that all users are members of the ACE domain and that most of the resources exist in the PUBS and CAD domains. You are a user with administrator rights in all domains. How would you allow users to access all of the resources, with a minimum set of trust relationships?

    • Options
    • A. Establish one-way trust relationships in which: PUBS trusts ACE CAD trusts ACE
    • B. Establish one-way trust relationships in which: ACE trusts PUBS ACE trusts CAD
    • C. Establish one-way trust relationships in which: PUBS trusts ACE CAD trusts PUBS ?
    • D. Establish one-way trust relationships in which PUBS trusts ACE ACE trusts CAD
    • E. None of the above
    • Discuss
    • 6. The rating in bits per second for UTP Cat 5 wiring is

    • Options
    • A. 100 Mbps
    • B. 10Mbps
    • C. 4Mbps
    • D. 2Mbps
    • E. None of the above
    • Discuss
    • 7. You want to connect 2 networks that are both lOBaseT Ethernet networks. The 2 networks are located in separate buildings so that they are approximately 1,000 meters apart. Which media should you use?

    • Options
    • A. Type 1 STP Cable
    • B. RG-58 A/U Coaxial Cable
    • C. fiber-optic cable
    • D. wireless infrared
    • E. None of the above
    • Discuss
    • 8. Which layers of the OSI model are managed by a network protocol such as Microsoft NetBEUI?

    • Options
    • A. network and transport
    • B. physical and data link
    • C. transport and session
    • D. media access control and logical link control
    • E. None of the above
    • Discuss
    • 9. Peter uses a Microsoft Windows 95 computer. What should he do to be able to administer domain user accounts from his computer?

    • Options
    • A. install User Manager for Domains on his computer
    • B. install the Client-based Network Administration Tools on his computer
    • C. install Windows NT Server on his computer
    • D. install Windows NT Workstation on his computer
    • E. None of the above
    • Discuss
    • 10. Maria needs to install software on a Windows NT Server computer which is a backup domain controller. When she attempts to log on to the server, she receives the message "Unable to log on locally". What must you do to enable Maria to log on to the server?

    • Options
    • A. In User Manager for Domains, define Maria as a local account
    • B. In User Manager for Domains, assign Maria to a group that has the right to log on locally
    • C. In the System option in Control Panel, select the setting that allows users to log on locally
    • D. In the System option in Control Panel, set the user environment variables to allow Maria to log on locally
    • E. None of the above
    • Discuss


    Comments

    There are no comments.

Enter a new Comment