An RC differentiator acts as a low-pass filter high-pass filter band-pass filter

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Electrical Engineering ‣ Time Response of Reactive Circuits Comments

Correct Answer

high-pass filter

Time Response of Reactive Circuits problems

Search Results

1. Referring to the give circuit, the output will
Options
A. decay to zero at the end of the pulse
B. reach 6 V at the end of the pulse
C. reach 3.78 V at the end of the pulse
D. reach 5.16 V at the end of the pulse

3. A single 6 V pulse with a width of 600 µs is applied to an integrator consisting of a 150 kΩ resistor and a 0.002 µF capacitor. To what voltage will the capacitor charge?
Options
A. 0 V
B. 3.78 V
C. 5.16 V
D. 6 V

4. An integrator consists of a 3.3 kΩ resistor and a 2 µF capacitor. A single 30 V, 6 ms pulse is applied to the input. How much will the capacitor charge?
Options
A. 10.3 V
B. 30 V
C. 12.09 V
D. 17.91 V

5. In electronic systems, repetitive-pulse waveforms are encountered
Options
A. more often than single pulses
B. less often than single pulses
C. about as often as single pulses
D. twice as often as single pulses

Comments

More in Electrical Engineering: