Discussion
Home ‣ Electrical Engineering ‣ Transformers Comments
- Question
When a 200 Ω load resistor is connected across the secondary winding of a transformer with a turns ratio of 4, the source "sees" a reflective load of
Options- A. 50 Ω
- B. 12.5 Ω
- C. 800 Ω
- D. 0 Ω
- Correct Answer
- 12.5 Ω
- 1. To step 110 V ac down to 20 V ac, the turns ratio must be
Options- A. 5.5
- B. 18
- C. 0.18
- D. 0.018 Discuss
- 2. In a certain loaded transformer, the secondary voltage is one-fourth the primary voltage. The secondary current is
Options- A. one-fourth the primary current
- B. four times the primary current
- C. equal to the primary current
- D. one-fourth the primary current and equal to the primary current Discuss
- 3. A capacitor of 2,000 pF is greater than
Options- A. 0.02 µF
- B. 0.002 µF
- C. 0.0002 µF
- D. 0.0000002 F Discuss
- 4. A 330 pF capacitor and a 220 pF capacitor are each connected across a 6 V dc source. The voltage across the 330 pF capacitor is
Options- A. 3 V
- B. 6 V
- C. 4 V
- D. 0 V Discuss
- 5. A capacitor of 0.02 µF is larger than
Options- A. 0.000020 F
- B. 200,000 pF
- C. 2,000 pF
- D. all of the above Discuss
- 6. What kVA rating is required for a transformer that must handle a maximum load current of 8 A with a secondary voltage of 2 kV?
Options- A. 4 kVA
- B. 0.25 kVA
- C. 16 kVA
- D. 8 kVA Discuss
- 7. The primary winding of a transformer has 110 V ac across it. What is the secondary voltage if the turns ratio is 8?
Options- A. 8.8 V
- B. 88 V
- C. 880 V
- D. 8,800 V Discuss
- 8. If a transformer has 50 turns in the primary winding and 10 turns in the secondary winding, what is the reflective resistance if the secondary load resistance is 250 Ω?
Options- A. 250 Ω
- B. 25 Ω
- C. 6,250 Ω
- D. 62,500 Ω Discuss
- 9. To step 120 V ac up to 900 V ac, the turns ratio must be
Options- A. 75
- B. 750
- C. 7.5
- D. 0.13 Discuss
- 10. A certain amplifier has 600 Ω internal resistance looking from its output. In order to provide maximum power to a 4 Ω speaker, what turns ratio must be used in the coupling transformer?
Options- A. 8
- B. 0.8
- C. 0.08
- D. 80 Discuss
Transformers problems
Search Results
Correct Answer: 0.18
Explanation:
Vp/Vs = Np/Ns
Vs = (Ns/Np)Vp
We required turns ratio i.e., (Ns/Np)
= Vs/Vp
= 20/110
= 0.181818182
[Note: p - primary; s - secondary]
For step down transfer, the turns ratio will be less than 1.
For simulation: Step-Down Transformer Circuit Simulator.
Vs = (Ns/Np)Vp
We required turns ratio i.e., (Ns/Np)
= Vs/Vp
= 20/110
= 0.181818182
[Note: p - primary; s - secondary]
For step down transfer, the turns ratio will be less than 1.
For simulation: Step-Down Transformer Circuit Simulator.
Correct Answer: four times the primary current
Correct Answer: 0.0002 µF
Correct Answer: 6 V
Correct Answer: 2,000 pF
Correct Answer: 16 kVA
Correct Answer: 880 V
Explanation:
V2/V1 = N2/N1
Turns ratio = N2/N1 = 8.
V2/110 = 8
V2 = 8 x 110
V2 = 880v.
Turns ratio = N2/N1 = 8.
V2/110 = 8
V2 = 8 x 110
V2 = 880v.
Correct Answer: 6,250 Ω
Correct Answer: 7.5
Correct Answer: 0.08
Comments
More in Electrical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.
Are you looking for motor control products like hysteresis brakes, tensioners or motor dynamometer, industrial V belt, PU belt, Timing belts? Our belts and simple motor test system for torque, speed and power with own controller and software We even go further to take some customized or sample orders (at our own cost) that nobody wants to do as it is not profitable, but just for improving our technology and gaining experience for the past 18 years. Send us your requirement or samples, we will do it better or cheaper! Accurate and Reliable! I am looking forward to hearing any comment from you. Thank you and have a nice day! Best Regards, Josephine Valid Belt Limited 8F, Leader Industrial Centre, Fo Tan, Hong Kong Website: Whatsapp: 852-64628287 Email: info@