logo

CuriousTab

CuriousTab

Discussion


Home Electrical Engineering Capacitors See What Others Are Saying!
  • Question
  • Two 0.68 µF capacitors are connected in series across a 10 kHz sine wave signal source. The total capacitive reactance is


  • Options
  • A. 46.8 Ω
  • B. 4.68 Ω
  • C. 23.41 Ω
  • D. 11.70 Ω

  • Correct Answer
  • 46.8 Ω 


  • More questions

    • 1. Referring to Problem 15, if the input voltage is a 6 V sine wave with a dc level of 10 V, what is the output voltage magnitude?

    • Options
    • A. 6 V
    • B. 597 mV
    • C. 5.97 V
    • D. 0 V
    • Discuss
    • 2. The minimum resistance value for a blue, gray, red, silver resistor is

    • Options
    • A. 612 Ω
    • B. 6,120 Ω
    • C. 6,800 Ω
    • D. 6,460 Ω
    • Discuss
    • 3. Four 8 Ω speakers are connected in parallel to the output of an audio amplifier. If the maximum voltage to the speakers is 12 V, the amplifier must be able to deliver to the speakers

    • Options
    • A. 18 W
    • B. 1.5 W
    • C. 48 W
    • D. 72 W
    • Discuss
    • 4. Referring to circuit given, if R1 is changed to a 68 Ω resistor, what will be the current through it?


    • Options
    • A. 0.16 A
    • B. 0.24 A
    • C. 0.2 A
    • D. 0.04 A
    • Discuss
    • 5. The induced voltage across a coil with 250 turns that is located in a magnetic field that is changing at a rate of 8 Wb/s is

    • Options
    • A. 1,000 V
    • B. 2,000 V
    • C. 31.25 V
    • D. 3,125 V
    • Discuss
    • 6. A 10 Ω resistor, a 90 mH coil, and a 0.015 µF capacitor are in series across an ac source. The impedance magnitude at 1,200 Hz below fr is

    • Options
    • A. 1,616 Ω
    • B. 161 Ω
    • C. 3,387 Ω
    • D. 1,771 Ω
    • Discuss
    • 7. Approximately how much current flows through a 3.3 MΩ resistor across a 30 V source?

    • Options
    • A. 9 µA
    • B. 90 µA
    • C. 900 µA
    • D. 9000 µA
    • Discuss
    • 8. In a certain transformer, the input power to the primary is 120 W. If 8.5 W are lost to the winding resistance, what is the output power to the load, neglecting any other issues?

    • Options
    • A. 0 W
    • B. 14.1 W
    • C. 111.5 W
    • D. 1,020 W
    • Discuss
    • 9. A balanced load is one in which all the impedances are equal.

    • Options
    • A. True
    • B. False
    • Discuss
    • 10. A 470 Ω resistor, a 220 Ω resistor, and a 100 Ω resistor are all in parallel. The total resistance is approximately

    • Options
    • A. 790 Ω
    • B. 470 Ω
    • C. 60 Ω
    • D. 30 Ω
    • Discuss


    Comments

    There are no comments.

Enter a new Comment