logo

CuriousTab

CuriousTab

Discussion

Home ‣ Electrical Engineering ‣ Magnetism and Electromagnetism Comments
  • Question

  • For a given wirewound core, an increase in current through the coil


  • Options
  • A. reverses the flux lines
  • B. decreases the flux density
  • C. increases the flux density
  • D. causes no change in flux density

  • Correct Answer
  • increases the flux density 

    • Magnetism and Electromagnetism problems

    Search Results

    • 1. The induced voltage across a stationary conductor in a stationary magnetic field is

    • Options
    • A. zero
    • B. reversed in polarity
    • C. increased
    • D. decreased
      • Discuss
    • 2. The unit for permeability is

    • Options
    • A. Wb/At × m
    • B. At/m
    • C. At/Wb
    • D. Wb
      • Discuss
    • 3. Referring to the given circuit, determine VTH and RTH if a 68 Ω resistor is connected in parallel across R2 and R3.


    • Options
    • A. 3.3 V, 148 Ω
    • B. 330 mV, 148 Ω
    • C. 3.3 V, 68 Ω
    • D. 330 mV, 68 Ω
      • Discuss
    • 4. In a two-source circuit, one source acting alone produces 12 mA through a given branch. The other source acting alone produces 10 mA in the opposite direction through the same branch. The actual current through the branch is

    • Options
    • A. 22 mA
    • B. 12 mA
    • C. 10 mA
    • D. 2 mA
      • Discuss
    • 5. What is the Thevenin equivalent (VTH and RTH) for the circuit given?


    • Options
    • A. 6.4 V, 422 Ω
    • B. 6.4 V, 560 Ω
    • C. 6.4 V, 680 Ω
    • D. 30 V, 422 Ω
      • Discuss
    • 6. If the cross-sectional area of a magnetic field increases, but the flux remains the same, the flux density

    • Options
    • A. increases
    • B. decreases
    • C. remains the same
    • D. doubles
      • Discuss
    • 7. The direction of a magnetic field within a magnet is

    • Options
    • A. from south to north
    • B. from north to south
    • C. back to front
    • D. front to back
      • Discuss
    • 8. When the speed at which a conductor is moved through a magnetic field is increased, the induced voltage

    • Options
    • A. increases
    • B. decreases
    • C. remains constant
    • D. reaches zero
      • Discuss
    • 9. The ability of a material to remain magnetized after removal of the magnetizing force is known as

    • Options
    • A. permeability
    • B. reluctance
    • C. hysteresis
    • D. retentivity
      • Discuss
    • 10. What is the magnetomotive force in a 75-turn coil of wire when there are 4 A of current through it?

    • Options
    • A. 18.75 At
    • B. 30 At
    • C. 300 At
    • D. 187 At
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.