2. The conductive loop on the rotor of a simple two-pole, single-phase generator rotates at a rate of 400 rps. The frequency of the induced output voltage is
4. One sine wave has a positive-going zero crossing at 15° and another sine wave has a positive-going zero crossing at 55°. The phase angle between the two waveforms is
8. Two 10 H inductors are in parallel and the parallel combination is in series with a third 10 H inductor. What is the approximate total reactance when a voltage with a frequency of 7 kHz is applied across the circuit terminals?
10. Two inductors, L1 and L2, are in parallel. L1 has a value of 25 µH and L2 a value of 50 µH. The parallel combination is in series with L3, a 20 µH coil. The entire combination is across an ac source of 60 Vrms at 300 kHz. The total rms current is