Discussion
Home ‣ Electrical Engineering ‣ Series-Parallel Circuits Comments
- Question
When a load resistance is removed from the output of a voltage divider circuit, the current drawn from the source
Options- A. decreases
- B. increases
- C. remains the same
- D. is cut off
- Correct Answer
- decreases
- 1. A certain circuit is composed of two parallel resistors. The total resistance is 1,403 Ω. One of the resistors is 2 kΩ. The other resistor value is
Options- A. 1,403 Ω
- B. 4.7 kΩ
- C. 2 kΩ
- D. 3,403 Ω Discuss
- 2. The parallel combination of a 470 Ω resistor and a 680 Ω resistor is in series with the parallel combination of four 2 kΩ resistors. The total resistance is
Options- A. 1,650 Ω
- B. 1,078 Ω
- C. 77.8 Ω
- D. 778 Ω Discuss
- 3. The internal resistance of a 20,000 ohm/volt voltmeter set on its 5 V range is
Options- A. 20,000 Ω
- B. 100,000 Ω
- C. 200,000 Ω
- D. 1,000,000 Ω Discuss
- 4. A certain Wheatstone bridge has the following resistor values: R1 = 10 kΩ, R2 = 720 Ω, and R4 = 2.4 kΩ. The unknown resistance is
Options- A. 24 Ω
- B. 2.4 Ω
- C. 300 Ω
- D. 3,000 Ω Discuss
- 5. A certain voltage divider consists of two 12 kΩ resistors in series. Which of the following load resistors will have the most effect on the output voltage?
Options- A. 1 MΩ
- B. 24 kΩ
- C. 18 kΩ
- D. 12 kΩ Discuss
- 6. Two 3.3 kΩ resistors are in series and this series combination is in parallel with a 4.7 kΩ resistor. The voltage across one of the 3.3 kΩ resistors is 12 V. The voltage across the 4.7 kΩ resistor is
Options- A. 24 V
- B. 12 V
- C. 0 V
- D. 6 V Discuss
- 7. On which of the following voltage range settings will a voltmeter present the minimum load on a circuit?
Options- A. 1 V
- B. 50 V
- C. 500 V
- D. 1,000 V Discuss
- 8. The parallel combination of a 6.8 kΩ resistor and a 10 kΩ resistor is in series with the parallel combination of a 2.2 kΩ resistor and a 1 kΩ resistor. A 100 V source is connected across the circuit. The resistor(s) with the greatest voltage drop is (are)
Options- A. 6.8 kΩ
- B. 2.2 kΩ
- C. 6.8 kΩ and 10 kΩ
- D. 2.2 kΩ and 1 kΩ Discuss
- 9. A certain voltage divider consists of three 1 kΩ resistors in series. Which of the following load resistors will have the least effect on the output voltage?
Options- A. 1 MΩ
- B. 100 kΩ
- C. 1 kΩ
- D. 330 Ω Discuss
- 10. In a certain five-step R/2R ladder network, the smallest resistor value is 1 kΩ. The largest value is
Options- A. indeterminable
- B. 2 kΩ
- C. 10 kΩ
- D. 20 kΩ Discuss
Series-Parallel Circuits problems
Search Results
Correct Answer: 4.7 kΩ
Correct Answer: 778 Ω
Correct Answer: 100,000 Ω
Correct Answer: 3,000 Ω
Correct Answer: 12 kΩ
Correct Answer: 24 V
Correct Answer: 1,000 V
Correct Answer: 6.8 kΩ and 10 kΩ
Correct Answer: 1 MΩ
Correct Answer: 2 kΩ
Comments
There are no comments.More in Electrical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.