logo

CuriousTab

CuriousTab

Discussion


Home Electronics and Communication Engineering Communication Systems Comments

  • Question
  • The number of noise sources in a BJT are


  • Options
  • A. 3
  • B. 2
  • C. 1
  • D. 4

  • Correct Answer


  • Explanation
    Shot noise, partition noise and thermal noise.

    Communication Systems problems


    Search Results


    • 1. Which of the following is taken as reference antenna for directive gain?

    • Options
    • A. Half wave dipole
    • B. Elementary doublet
    • C. Isotropic
    • D. Infinitesimal dipole
    • Discuss
    • 2. Decimal number 10 is equal to binary number

    • Options
    • A. 1110
    • B. 1010
    • C. 1001
    • D. 1000
    • Discuss
    • 3. Decimal 43 in hexadecimal and BCD number system is respectively.

    • Options
    • A. B2, 01000011
    • B. 2B, 01000011
    • C. 2B, 00110100
    • D. B2, 01000100
    • Discuss
    • 4. A counter type A/D converter contains a 4 bit binary ladder and a counter driven by a 2 MHz clock. Then conversion time

    • Options
    • A. 8 ? sec
    • B. 10 ? sec
    • C. 2 ? sec
    • D. 5 ? sec
    • Discuss
    • 5. The basic storage element in a digital system is

    • Options
    • A. flip flop
    • B. counter
    • C. multiplexer
    • D. encoder
    • Discuss
    • 6. An earth mat for a communication tower consists of

    • Options
    • A. one or two radials extending from base of tower at a depth of about 5 cm below ground
    • B. a large number of radials extending from base of tower at a depth of about 3 m
    • C. a large number of radials extending from base of tower at a depth of about 30 cm
    • D. none of the above
    • Discuss
    • 7. In CCIR-B system, the time between start of one H syn. pulse and next is

    • Options
    • A. 64 ?s
    • B. 6.4 ?s
    • C. 640 ?s
    • D. 0.64 ?s
    • Discuss
    • 8. A cordless telephone using separate frequencies for transmission in base and portable units is known as

    • Options
    • A. duplex arrangement
    • B. half duplex arrangement
    • C. either (a) or (b)
    • D. neither (a) nor (b)
    • Discuss
    • 9. Signal to noise ratio of microphone is defined as the ratio of output when the sound pressure is __________ to the output in the absence of any sound signal.

    • Options
    • A. 0.5 Pa
    • B. 0.2 Pa
    • C. 0.1 Pa
    • D. 0.01 Pa
    • Discuss
    • 10. Some types of traps used in video IF amplifier of colour TV are

    • Options
    • A. shunt traps
    • B. series traps
    • C. absorption traps
    • D. all of the above
    • Discuss


    Comments

    There are no comments.

Enter a new Comment