A two winding transformer is feeding a single phase half wave rectifier circuit. The load is purely resistive. The rms value of transformer secondary current is Is and rms value of load current in Irms. Then
Options
A. Is = Irms irrespective of the value of firing angle
B. Is = 0.5 Irms irrespective of the value of firing angle
C. Is = Irms if firing angle is less than 30°
D. Is = Irms if firing angle is more than 30°
Correct Answer
Is = Irms irrespective of the value of firing angle
Explanation
.
Power Electronics problems
Search Results
1. In a step down chopper using pulse width modulation, Ton = 3 x 10-3 and Toff = 1 x 10-3 s. The chopping frequency is
7. In a single phase full wave converter (M-2 connection) feeding on R - L load, the input voltage is v = Vm sin ?t. The expression for dc output voltage is
Due to inductive load the period of conduction is a to p + a in each half cycle.
8. An SCR is triggered at 40° in the positive half cycle only. The average anode current is 50 A. If the firing angle is changed to 80°, the average anode current is likely to be
Correct Answer: Both A and R are correct and R is correct explanation of A
Explanation:
Since duration of surge current is small, the associated energy is small.
10. A single phase half wave controlled rectifier circuit has a free wheeling diode. The load is a combination of R and L. The firing angle is a. The period of conduction of SCR and free wheeling diode respectively are