A wave is propagated in a waveguide at frequency of 9 GHz and separation is 2 cm

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Electronics and Communication Engineering ‣ Electromagnetic Field Theory Comments

Question
A wave is propagated in a waveguide at frequency of 9 GHz and separation is 2 cm between walls find cut off wavelength for dominant mode.
Options
A. 4 cm
B. 1 cm
C. 2 cm
D. 8 cm

Correct Answer

4 cm

Explanation

A wave is propagated in a waveguide at frequency of 9 GHz and separation is 2 cm between walls find

.

Electromagnetic Field Theory problems

Search Results

1. A broadside array consisting of 200 cm wavelength with 10 half-wave dipole spacing 10 cm. And if each array element feeding with 1 amp. current and operating at same frequency then find the half power beamwidth
Options
A. 4�
B. 2�
C. 10�
D. 15�

3. Two identical antennas are placed in the ? = p/2 plane as shown in the figure. The elements have equal amplitude excitation with 180� polarity difference, operating of the far-zone resultant electric field strength normalized with that of a single element, both computed for ? = 0, is
Options
A.
B.
C.
D.

4. A rectangular metal waveguide filled with a dielectric of relative permittivity ?_r = 4, has the inside dimensions 3 x 1.2 cm, the cut off frequency for the dominant mode is
Options
A. 2.5 GHz
B. 5 GHz
C. 10 GHz
D. 12.5 GHz

5. A broadside array operating at 100 cm wavelength consist of 4 half-wave dipoles spaced 50 cm apart. Each element carries radio frequency current in the same phase and of magnitude 0.5 A. The radiated power will be
Options
A. 196 W
B. 73 W
C. 36.5 W
D. 18.25 W

6. A (75 - j 40) W load is connected to a co-axial line of z₀ = 75? at 6 MHz. The load matching on the line can be accomplished by connecting
Options
A. a short circuit stub at the load
B. an inductance at the load
C. a short circuit stub at a specific distance from the load
D. a capacitance at a specific distance from the load

7. The electric field of the incident wave is , where ? = 3 x 10⁹p and ? = 10 p. The electric field of the transmitted wave E_t is given by
Options
A.
B.
C.
D.

8. The electric field on the surface of a perfect conductor is 2V/m. The conductor is immersed in water with ? = 80 ?₀. The surface charge density on the conductor is ((?₀ = 10^-9/36p)F/m)
Options
A. 0 c/m²
B. 2 c/m²
C. 1.8 x 10^-11 c/m²
D. 1.14 x 10^-9 c/m²

10. Which one of the following potential does not satisfy Laplace's equations?
Options
A. v = 10 xy
B. v = p cos ?
C.
D. v = f cos ? + 10

Comments

There are no comments.

More in Electronics and Communication Engineering: