Calculate the wave impedance for TM mode in rectangular waveguide for dominant m

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Electronics and Communication Engineering ‣ Electromagnetic Field Theory Comments

Question
Calculate the wave impedance for TM mode in rectangular waveguide for dominant mode at 3 GHz having
Options
A. (120p) ?
B. 377 ?
C. 226 ?
D. 629 ?

Correct Answer

226 ?

Explanation

Calculate the wave impedance for TM mode in rectangular waveguide for dominant mode at 3 GHz having

? = 226 ?.

Electromagnetic Field Theory problems

Search Results

1. The torque (in mm) acting on a circular current loop of radius 1 mm in the xy plane, connected at the origin and with current 0.1 A, flowing in the sense of increasing in a magnetic field
is
Options
A.
B.
C. 10^-12p
D. - 10^-12p

2. Which of the following should dominant wave have?
Options
A. Lowest cut off frequency
B. Highest cut off frequency
C. No attenuation
D. No phase shift

3. A short circuited stub is shunt connected to a transmission line as shown in the figure is, if z₀ = 500 ohms, the admittance y seen at the function of the stub and the transmission line is
Options
A. (0.01 - j 0.02) mho
B. (0.02 - j 0.01) mho
C. (0.04 - j 0.02) mho
D. (0.02 + j 0) mho

4. Refractive index of glass is 1.5. Find the wavelength of a beam of light with a frequency of 10¹⁴ Hz in glass. Assume velocity of light is 3 x 10⁸ m/sec in vacuum.
Options
A. 4 ?m
B. 3 ?m
C. 2 ?m
D. 1 ?m

5. Find the noise factor for an antenna at 27�C with equivalent noise temperature 30�K
Options
A. 20
B. 100
C. 300
D. 1.1

6. Characteristic impedance of a transmission line is 50 ?. Input impedance of the open circuited line.
Z_oc = 100 + J150 ?. When transmission line is short circuited, then value of the input impedance will be
Options
A. 50 ?
B. 100 + J150 ?
C. 7.69 + J11.54?
D. 7.69 - J11.54 ?

7. The input impedance of short-circuited line of length l where ?/4 < l < ?/2, is
Options
A. resistive
B. inductive
C. capacitive
D. none of the above

8. Z_L = 200 ? and it is desired that Z_i = 50 ? The quarter wave transformer should have a characteristic impedance of
Options
A. 100 ?
B. 40 ?
C. 10000 ?
D. 4 ?

9. For F₁ layer the maximum ionic density is 2.3 x 10⁴ electrons per cc. The critical frequency for this layer will be
Options
A. 1.36 MHz
B. 13.6 MHz
C. 136 MHz
D. 1360 MHz

10. A wave is propagated in a waveguide at frequency of 9 GHz and separation is 2 cm between walls calculate the phase velocity for dominant mode.
Options
A. 3 x 10⁸ m/sec
B. 5 x 10⁸ m/sec
C. 1.5 x 10⁸ m/sec
D. 9 x 10⁸ m/sec

Comments

There are no comments.

More in Electronics and Communication Engineering: