logo

CuriousTab

CuriousTab

Discussion


Home Electronics and Communication Engineering Electronic Devices and Circuits Comments

  • Question
  • As compared to an ordinary semiconductor diode, a Schottky diode


  • Options
  • A. has lower cut in voltage
  • B. has higher cut in voltage
  • C. lower reverse saturation current
  • D. both (b) and (c)

  • Correct Answer
  • has lower cut in voltage 

    Explanation
    Cut in voltage in Schottky diode is about 0.3 V as compared to 0.7 V in ordinary semiconductor diode.

    Electronic Devices and Circuits problems


    Search Results


    • 1. In a zener diode

    • Options
    • A. the forward current is very high
    • B. sharp breakdown occurs at a certain reverse voltage
    • C. the ratio v-i can be negative
    • D. there are two p-n junctions
    • Discuss
    • 2. In an n-p-n transistor biased for operation in forward active region

    • Options
    • A. emitter is positive with respect to base
    • B. collector is positive with respect to base
    • C. base is positive with respect to emitter and collector is positive with respect to base
    • D. none of the above
    • Discuss
    • 3. The power dissipation in a transistor is the product of

    • Options
    • A. emitter current and emitter to base voltage
    • B. emitter current and collector to emitter voltage
    • C. collector current and collector to emitter voltage
    • D. none of the above
    • Discuss
    • 4. In a degenerate n type semiconductor material, the Fermi level,

    • Options
    • A. is in valence band
    • B. is in conduction band
    • C. is at the centre in between valence and conduction bands
    • D. is very near valence band
    • Discuss
    • 5. The normal operation of JFET is

    • Options
    • A. constant voltage region
    • B. constant current region
    • C. both constant voltage and constant current regions
    • D. either constant voltage or constant current region
    • Discuss
    • 6. A periodic voltage has following value for equal time intervals changing suddenly from one value to next... 0, 5, 10, 20, 50, 60, 50, 20, 10, 5, 0, -5, -10 etc. Then rms value of the waveform is

    • Options
    • A. 31 V
    • B. 32 V
    • C. insufficient data
    • D. none of these
    • Discuss
    • 7. Assertion (A): When a high reverse voltage is applied to a p-n junction the diode breaks down.

      Reason (R): High reverse voltage causes Avalanche effect.


    • Options
    • A. Both A and R are true and R is correct explanation of A
    • B. Both A and R are true but R is not a correct explanation of A
    • C. A is true but R is false
    • D. A is false but R is true
    • Discuss
    • 8. An LED has a rating of 2 V and 10 mA. It is used along with 6V battery. The range of series resistance is

    • Options
    • A. 0 to 200 ?
    • B. 200 - 400 ?
    • C. 200 ? and above
    • D. 400 ? and above
    • Discuss
    • 9. Work function of oxide coated cathode is much lower than that of tungsten cathode.

    • Options
    • A. True
    • B. False
    • Discuss
    • 10. Assertion (A): A p-n junction has high resistance in reverse direction.

      Reason (R): When a reverse bias is applied to p-n junction, the width of depletion layer increases.


    • Options
    • A. Both A and R are true and R is correct explanation of A
    • B. Both A and R are true but R is not a correct explanation of A
    • C. A is true but R is false
    • D. A is false but R is true
    • Discuss


    Comments

    There are no comments.

Enter a new Comment