logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Airport Engineering Comments

  • Question
  • Pick up the correct statement from the following:


  • Options
  • A. Approximate geometric centre of the landing area, is called air port reference point
  • B. The boundaries of horizontal surface and conical surface are marked with reference to air port reference point
  • C. The location of the air port on a map is the position of air port reference point
  • D. All the above.

  • Correct Answer
  • All the above. 


  • Airport Engineering problems


    Search Results


    • 1. The runway orientation is made so that landing and take off are

    • Options
    • A. against the wind direction
    • B. along the wind direction
    • C. perpendicular to wind direction
    • D. none of these.
    • Discuss
    • 2. The distance between main gears is 10 m, and the distance of nose gear from centre of main gears is 30 m. If the angle of turning is 60°, the distance of centre of rotation from the nearer main gear, is

    • Options
    • A. 12.30 m
    • B. 11.30 m
    • C. 10.30 m
    • D. 9.30 m
    • Discuss
    • 3. Pick up the correct statement from the following:

    • Options
    • A. F.I.R. stands for flight information regions
    • B. F.I.C. stands for flight information centre
    • C. Radius of control area is 160 km
    • D. Radius of control zone is 40 km
    • E. All the above.
    • Discuss
    • 4. The fuse large includes

    • Options
    • A. passengers chamber
    • B. pilot's cabin
    • C. tail of aircraft
    • D. all the above.
    • Discuss
    • 5. The maximum length and pavement strength of the runway is that of

    • Options
    • A. A 1
    • B. B 2
    • C. B 3
    • D. G 7
    • Discuss
    • 6. The bearing of the runway at threshold is 290°, the runway number is

    • Options
    • A. N 70° W
    • B. 290°
    • C. 29°
    • D. W 20° N
    • Discuss
    • 7. According to the International Civil Aviation Organisation (I.C.A.O.) the strength of runway pavements, have been coded by

    • Options
    • A. Seven English alphabets
    • B. Last Seven English alphabets
    • C. First Seven English alphabets
    • D. First seven numbers
    • E. None of these.
    • Discuss
    • 8. Pick up the correct statement from the following:

    • Options
    • A. The centre line of the approach area coincides with that of the runway
    • B. Approach areas are measured in horizontal surfaces
    • C. The imaginary inclined plane which is directly above the approach area is called approach surface
    • D. Obstruction clearance surface and approach surface are same
    • E. All the above.
    • Discuss
    • 9. The best direction of a runway is along the direction of

    • Options
    • A. longest line on wind rose diagram
    • B. shortest line on the wind rose diagram
    • C. line clear of wind rose diagram
    • D. none of these.
    • Discuss
    • 10. Pick up the correct abbreviation from the following:

    • Options
    • A. I.L.S. (instrument landing system)
    • B. V.H.F, (very high frequency)
    • C. L.O.M. (low powered outer marker)
    • D. L.M.M. (low powered middle marker)
    • E. All the above
    • Discuss


    Comments

    There are no comments.

Enter a new Comment