Discussion
Home ‣ Civil Engineering ‣ Airport Engineering Comments
- Question
International Civil Aviation Organisation (I.C.A.O.) was set up at Montreal (Canada), in
Options- A. 1929
- B. 1939
- C. 1947
- D. 1950
- Correct Answer
- 1947
- 1. From the end of an instrumental runway, the approach surface rises outwards
Options- A. 1 in 20
- B. 1 in 30
- C. 1 in 40
- D. 1 in 50 Discuss
- 2. The meterological condition which influences the size and location of an air port is
Options- A. atmosphere pressure
- B. air density
- C. reduced level
- D. wind direction
- E. all the above. Discuss
- 3. To cope up high temperature of 196°C, the taxi ways and aprons are constructed with
Options- A. asphaltic concrete
- B. rubberised tar concrete
- C. plain concrete
- D. epoxy asphalt concrete
- E. all the above. Discuss
- 4. Pick up the correct statement from the following:
Options- A. The distance between the points of intersection of the extreme tangents to the transition curve is kept greater than 7500 m x sum of grade changes at the point of intersection
- B. The rate of change of grade is limited to 0.3% per 30 m length of the curve
- C. According to I.C.A.O. the maximum longitudinal gradient along a runway is limited to 1.5%
- D. All the above. Discuss
- 5. Pick up the correct statement from the following:
Options- A. Air screw converts the energy given by the engine into speed
- B. The propellers which are driven by turbine engines, are technically called turboprops
- C. The aircrafts which obtain the thrust directly from turbine engine, are called turbo-jets
- D. The aircraft which is filled with a fan infront of turbo-jet engine, is called turbofan propelled aeroplane
- E. All the above. Discuss
- 6. Conical surface of the approach area rises outwards
Options- A. 1 in 10
- B. 1 in 15
- C. 1 in 20
- D. 1 in 25 Discuss
- 7. The coordinates of the ends of a runway are (5000, 5000) and (8000, 7000). The co-ordinates of an other runway are (4600, 5100) and (7000, 5300). The co-ordinates of the A.R.P. are
Options- A. (6500, 6000)
- B. (5800, 5200)
- C. (61500, 5600)
- D. (8000, 7000) Discuss
- 8. Pick up the correct statement from the following:
Options- A. Approach zone survey is carried out to determine the elevations of the protruding obstructions above horizontal, conical and transitional surfaces
- B. The wind data of an air port is depicted in the form of a chart known as wind rose
- C. The landing and take off of the air craft is made against the wind direction
- D. The product of wind loading and power loading is called air craft rating
- E. All the above. Discuss
- 9. According to I.C.A.O. the slope of transitional surface at right angles to the centre line of runway, is kept
Options- A. 1 in 4
- B. 1 in 5
- C. 1 in 6
- D. 1 in 7
- E. 1 in 10 Discuss
- 10. Pick up the incorrect statement from the following:
Options- A. In single engine aeroplanes, the engine is provided in the nose of the aircraft
- B. In double engine aeroplanes, one engine on either wing is placed symmetrically
- C. In three engine aeroplanes, two engines are placed on both wings and one engine is placed in the tail
- D. None of these. Discuss
Airport Engineering problems
Search Results
Correct Answer: 1 in 50
Correct Answer: all the above.
Correct Answer: all the above.
Correct Answer: All the above.
Correct Answer: All the above.
Correct Answer: 1 in 20
Correct Answer: (61500, 5600)
Correct Answer: All the above.
Correct Answer: 1 in 7
Correct Answer: In three engine aeroplanes, two engines are placed on both wings and one engine is placed in the tail
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.