logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Strength of Materials See What Others Are Saying!
  • Question
  • A triangular section having base b, height h, is placed with its base horizontal. If the shear stress at a depth y from top is q, the maximum shear stress is


  • Options
  • A. A triangular section having base b, height h, is placed with its base horizontal. If the shear stres
  • B. A triangular section having base b, height h, is placed with its base horizontal. If the shear stres
  • C. A triangular section having base b, height h, is placed with its base horizontal. If the shear stres
  • D. A triangular section having base b, height h, is placed with its base horizontal. If the shear stres

  • Correct Answer
  •  


  • More questions

    • 1. At the same mean velocity, the ratio of head loss per unit length for a sewer pipe flowing full to that for the same pipe flowing half full would be :

    • Options
    • A. 2.0
    • B. 1.63
    • C. 1.00
    • D. 0.61
    • Discuss
    • 2. Pick up the cohesive soil from the following:

    • Options
    • A. Red earth
    • B. Clay
    • C. Black cotton soil
    • D. Compacted ground.
    • Discuss
    • 3. Kaolin is chemically classified as

    • Options
    • A. metamorphic rock
    • B. argillaceous rock
    • C. calcareous rock
    • D. silicious rock.
    • Discuss
    • 4. A part of the slab may be considered as the flange of the T-beam if

    • Options
    • A. flange has adequate reinforcement transverse to beam
    • B. it is built integrally with the beam
    • C. it is effectively bonded together with the beam
    • D. all the above.
    • Discuss
    • 5. Carbonates in water produce

    • Options
    • A. temporary hardness
    • B. permanent hardness
    • C. acidity
    • D. alkanity.
    • Discuss
    • 6. At lower culmination, the pole star moves

    • Options
    • A. eastward
    • B. westward
    • C. northward
    • D. southward.
    • Discuss
    • 7. While designing a stair, the product of rise and going is approximately kept equal to

    • Options
    • A. 350
    • B. 420
    • C. 450
    • D. 500
    • E. 600.
    • Discuss
    • 8. The rock which is not calcareous, is :

    • Options
    • A. lime stone
    • B. macl
    • C. chalk
    • D. laterite
    • E. none of these.
    • Discuss
    • 9. Tacking rivets in compression plates not exposed to the weather, have a pitch not exceeding 300 mm or

    • Options
    • A. 16 times the thickness of outside plate
    • B. 24 times the thickness of outside plate
    • C. 32 times the thickness of outside plate
    • D. 36 times the thickness of outside plate.
    • Discuss
    • 10. Expansion joints are provided if the length of concrete structures exceeds

    • Options
    • A. 10 m
    • B. 15 m
    • C. 15 m
    • D. 35 m
    • E. 45 m
    • Discuss


    Comments

    There are no comments.

Enter a new Comment