logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Concrete Technology See What Others Are Saying!
  • Question
  • If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, 6 kg, 4 kg respectively, the fineness modulus of the aggregate, is


  • Options
  • A. 7.30
  • B. 7.35
  • C. 7.40
  • D. 7.45
  • E. none of these.

  • Correct Answer
  • 7.40 


  • More questions

    • 1. If H and d are the water depth and drop in the bed level at a Sarda fall, the width B of the trapezoidal crest, is given by

    • Options
    • A. B = 0.22 H + d
    • B. B = 0.33 H + d
    • C. B = 0.44 H + d
    • D. B = 0.55 H + d
    • Discuss
    • 2. In a three hinged arch, the bending moment will be zero

    • Options
    • A. at right hinge only
    • B. at left hinge only
    • C. at both right and left hinges
    • D. at all the three hinges.
    • Discuss
    • 3. It ? is the probable error of an observed bearing of a line of length l, the error over the whole length of the traverse of n lines of length l is

    • Options
    • A. l n
    • B. n
    • C. ?
    • D. ? n
    • Discuss
    • 4. For the most economical trapezoidal open channel,

    • Options
    • A. half of the top width must be equal to one of the sloping sides
    • B. the hydraulic mean depth must be equal to half the depth of flow
    • C. the semicircle drawn with top width as diameter must touch the three sides of the channel
    • D. All of these.
    • Discuss
    • 5. Setting out of Lemniscate transition curves, is done with

    • Options
    • A. perpendicular offsets
    • B. radial offsets
    • C. deflection angles
    • D. polar deflection angles.
    • Discuss
    • 6. A construction schedule is prepared after collecting

    • Options
    • A. number of operations
    • B. output of labour
    • C. output of machinery
    • D. quantity of various items
    • E. all the above.
    • Discuss
    • 7. Which one of the following statements is true?

    • Options
    • A. The value of kinetic energy correction factor for turbulent flow lies between 1.03 to 1.06
    • B. The value of kinetic energy correction factor for laminar flow is 2
    • C. The practical value of kinetic energy correction factor for turbulent flow is unity
    • D. all the above.
    • Discuss
    • 8. The rotational velocity of a satellite is increased by 450 m per second if its launch is done from equator

    • Options
    • A. eastward
    • B. northward
    • C. westward
    • D. southward
    • E. upward.
    • Discuss
    • 9. If the length of a transition curve to be introduced between a straight and a circular curve of radius 500 m is 90 m, the maximum perpendicular offset for the transition curve, is

    • Options
    • A. 0.70 m
    • B. 1.70 m
    • C. 2.70 m
    • D. 3.70 m
    • E. 4.70 m
    • Discuss
    • 10. The ratio of the inertia and viscous forces acting in any flow, ignoring other forces, is called

    • Options
    • A. Euler number
    • B. Frode number
    • C. Reynold number
    • D. Weber number.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment