Discussion
Home ‣ Civil Engineering ‣ Docks and Harbours Comments
- Question
Pick up the correct statement from the following:
Options- A. The regular periodic rise and fall of the surface of the sea, is called tide.
- B. The average difference in water level between high tide and low tide at a place, is called tidal range
- C. The movement of water caused by the action of tide, is called a tidal current
- D. all of the above.
- Correct Answer
- all of the above.
- 1. The dock wall is designed as a gravity retaining wall and is tested for
Options- A. back fill pressure when the dock is empty
- B. maximum water pressure from the dock without any back fill
- C. the load charge transmitted to the dock by the movement of loaded vehicles or trains on the way
- D. all of the above. Discuss
- 2. The horizontal angles from the boat between A and B and B and C, the stations on the shore are respectively ?1 and ?2. The distances AB = L1 and BC = L2. For calculating the angle ?2 at C between the boat and station B is obtained by using the following formula: where (? is horizontal angle between A and C at B).
Options- A.
- B. ?t tan ?2 = 360° - (?1 + ?2 + ?) = ?
- C.
- D. all the above. Discuss
- 3. Pick up the correct statement from the following:
Options- A. The artificial barrier constructed to enclose "n area for safe anchorage, is called break water
- B. The smoothened surface at the top end of the vertical face of a guay wall, is called fending
- C. The effective berthing lengths of inclined guays can be adjusted
- D. All the above. Discuss
- 4. Soundings are required for
Options- A. making nautical charts for navigation
- B. ascertaining the areas subject to scour or silting
- C. obtaining detailed information for construction
- D. all the above. Discuss
- 5. Pick up the correct statement from the following:
Options- A. The breakwater which can be used as a platform for loading and unloading of cargo is called a mole
- B. The brick masonry retaining wall which is used for loading and unloading of cargo is called guay wall
- C. Three types of break waters are generally provided in harbours
- D. All of the above. Discuss
- 6. Pick up the correct statement from the following:
Options- A. An artificial barrier which makes the enclosed area safe for anchorage of ships, is known as break water
- B. The break water whose inside is used as a plateform for loading and unloading is called a mole
- C. The length of the quay wall is governed by the length of the largest vessel likely to be berthed
- D. All the above. Discuss
- 7. According to the recommendations of International Navigational Congress in 1912, the ratio of length to width at the entrance for passenger vessels is :
Options- A. 7.25 to 1
- B. 7.80 to 1
- C. 8.11 to 1
- D. 8.44 to 1 Discuss
- 8. The fixed mooring does not require
Options- A. mooring post
- B. bollard
- C. anchors
- D. capstan. Discuss
- 9. If F is the fetch, the straight line distance of open water available in kilometres, the height of the wave in metres is
Options- A. 0.15 F
- B. 0.20 F
- C. 0.28 F
- D. 0.34 F Discuss
- 10. At a place the shore line is along North West-South East. The wind is blowing from the north. The littoral drift will be along
Options- A. south east
- B. south
- C. south west
- D. west
- E. north west Discuss
Docks and Harbours problems
Search Results
Correct Answer: all of the above.
Correct Answer: all the above.
Correct Answer: All the above.
Correct Answer: all the above.
Correct Answer: All of the above.
Correct Answer: All the above.
Correct Answer: 8.44 to 1
Correct Answer: anchors
Correct Answer: 0.34 F
Correct Answer: south east
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.