Discussion
Home ‣ Civil Engineering ‣ Railways Comments
- Question
If a 0.7% upgrade meets a 0.65% downgrade at a summit and the permissible rate of change of grade per chain length is 0.10%, the length of the vertical curve, is
Options- A. 10 chains
- B. 12 chains
- C. 14 chains
- D. 16 chains
- Correct Answer
- 14 chains
- 1. The quantity of stone ballast required per metre tangent length, is
Options- A. 1.15 m3
- B. 1.14 m3
- C. 1.13 m3
- D. 1.12 m3
- E. 1.11 m3 Discuss
- 2. If D is distance between centres of two parallel track of gauge G, then, total length of cross-over (from the point of commencement to the point of termination) with an intermediate straight portion and N crossing, is given by
Options- A. DN + G (N + 1 + N2)
- B. DN + G (2N + 1 + N2)
- C. DN + G (3N + 1 + N2)
- D. DN + G (4N + l +N2) Discuss
- 3. Bearing plates are used to fix
Options- A. flat footed rails to the wooden sleepers
- B. double headed rails to the wooden sleepers
- C. bull headed rails to the wooden sleepers
- D. flat footed rails to the cast iron sleepers
- E. none of these. Discuss
- 4. The tread of wheels is provided an outward slope of
Options- A. 1 in 10
- B. 1 in 15
- C. 1 in 20
- D. 1 in 25
- E. 1 in 30 Discuss
- 5. If L is length of a rail and R is the radius of a curve, the versine h for the curve, is
Options- A.
- B.
- C.
- D.
- E.
Discuss
- 6. For flat bottom sleepers, maximum size of ballast, is
Options- A. 50 mm
- B. 40 mm
- C. 33 mm
- D. 25 mm
- E. 20 mm Discuss
- 7. A kink is made in stock rails, ahead of the toe of switch at a distance of
Options- A. 10 cm
- B. 15 cm
- C. 20 cm
- D. 30 cm Discuss
- 8. At a rail joint, the ends of adjoining rails, are connected with a pair of fish plates and
Options- A. 2 fish bolts
- B. 4 fish bolts
- C. 6 fish bolts
- D. 8 fish bolts Discuss
- 9. Coning of wheels
Options- A. prevent lateral movement of wheels
- B. provide smooth running of trains
- C. avoid excessive wear of inner faces of rail
- D. all the above. Discuss
- 10. Pick up the incorrect statement from the following:
Options- A. An activity of a project is denoted by an arrow on the net work
- B. The tail of the arrow indicates the start of the activity
- C. The head of the arrow indicates the end of the activity
- D. The arrows are drawn to scale from left to right
- E. Each activity consumes a given time. Discuss
Railways problems
Search Results
Correct Answer: 1.11 m3
Correct Answer: DN + G (3N + 1 + N2)
Correct Answer: flat footed rails to the wooden sleepers
Correct Answer: 1 in 20
Correct Answer:
Correct Answer: 50 mm
Correct Answer: 15 cm
Correct Answer: 4 fish bolts
Correct Answer: all the above.
Correct Answer: The arrows are drawn to scale from left to right
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.