logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Railways See What Others Are Saying!
  • Question
  • If absolute levels of rails at the consecutive axles A, B, and C separated by 1.8 metres are 100.505 m, 100.530 m, and 100.525 m respectively, the unevenness of rails, is


  • Options
  • A. 0.065 m
  • B. 0.055 m
  • C. 0.045 m
  • D. 0.035 m

  • Correct Answer
  • 0.065 m 


  • More questions

    • 1. A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free end. If the modulus of elasticity of the material is 0.2 x 106 N/mm2, the deflection of the free end, is

    • Options
    • A. 2 mm
    • B. 3 mm
    • C. 4 mm
    • D. 5 mm
    • E. 6 mm
    • Discuss
    • 2. The creep coefficient i.e. the ratio of ultimate creep and elastic strain after

    • Options
    • A. 7 days is 2.2
    • B. 28 days is 1.6
    • C. 365 days is 1.1
    • D. all the above.
    • Discuss
    • 3. A and B are two towers of equal height diametrically opposite on either side of the nadir point, at 3 km and 5 km distances. Which one of the following statements is correct?

    • Options
    • A. Height displacement of A will be less than that of B
    • B. Height displacement of B will be less than that of A
    • C. Height displacement of A and B is equal
    • D. Height displacement of A and B will be towards each other
    • Discuss
    • 4. A hydraulic structure is designed to withstand

    • Options
    • A. seepage forces
    • B. hydraulic jump
    • C. hydraulic pressure
    • D. all the above.
    • Discuss
    • 5. The motion of a particle moving with S.H.M. from an extremity to the other, constitutes

    • Options
    • A. half an oscillation
    • B. one full oscillation
    • C. two oscillations
    • D. none of these.
    • Discuss
    • 6. The shrinkage of concrete

    • Options
    • A. is proportional to water content is the mix
    • B. is proportional to cement concrete
    • C. increases with age of concrete
    • D. all the above.
    • Discuss
    • 7. The form work from the underside of slabs, can be removed only after

    • Options
    • A. 1 day
    • B. 4 days
    • C. 7 days
    • D. 14 days.
    • Discuss
    • 8. Pick up the correct statement function following:

    • Options
    • A. The coarse material which has a smaller angle of repose, causes a steeper beach slope
    • B. The coarse material which has a greater angle of repose, causes a steeper beach slope
    • C. The flattening out of the beach is caused due to the movement of small and uniform particles leeward.
    • D. both (b) and (c).
    • Discuss
    • 9. A stair should not have pitch more than

    • Options
    • A. 25°
    • B. 30°
    • C. 40°
    • D. 50°
    • E. 60°.
    • Discuss
    • 10. The great circle which passes through the zenith, nadir and the poles, is known as

    • Options
    • A. meridian
    • B. vertical circle
    • C. prime vertical
    • D. none of these.
    • Discuss


    Comments

    There are no comments.

Enter a new Comment