Discussion
Home ‣ Civil Engineering ‣ Railways Comments
- Question
The difference in the lengths of two diagonals of a rail diamond is
Options- A.
- B.
- C.
- D.
- Correct Answer
-
- 1. Maximum wheel base distance provided on Indian B.G. tracks, is
Options- A. 4.096 m
- B. 5.096 m
- C. 6.096 m
- D. 7.096 m
- E. none of these. Discuss
- 2. The type of switch generally used for B.G. and M.G. tracks, is
Options- A. articulated
- B. undercut
- C. over riding
- D. straight cut. Discuss
- 3. Pick up the incorrect statement from the following:
Options- A. Fish plates fit the underside of the rail head
- B. Fish plates fit the top of the rail foot
- C. Fish plates fit the web of the rail section
- D. Cross sectional area of fish plates, is normally the same as that of the rail section. Discuss
- 4. Rail joint supported on a single sleeper, is known
Options- A. suspended rail joint
- B. bridge rail joint
- C. supported rail joint
- D. square rail joint. Discuss
- 5. A scissors cross-over consists of
Options- A. two pairs of points, four acute angle crossings and two obtuse angle crossings
- B. four pairs of points, four acute angle crossings and four obtuse angle crossings
- C. four pairs of points, six acute angle crossings and two obtuse angle crossings
- D. two pairs of points, six acute angle crossings and four obtuse angle crossings. Discuss
- 6. Overall depth of a dog spike, is
Options- A. 120.6 mm
- B. 155.90 mm
- C. 135 mm
- D. 150 mm
- E. none of these. Discuss
- 7. Mr. W. Simms, the consulting Engineer to the Government of India recommended the gauge for Indian railways
Options- A. 1.435 m as adopted in England
- B. 1.800 m as per Indian conditions
- C. 1.676 m as a compromise gauge
- D. 1.000 m as a standard gauge Discuss
- 8. The sleepers which satisfy the requirements of an ideal sleeper, are
Options- A. cast iron sleepers
- B. R.C.C. sleepers
- C. steel sleepers
- D. wooden sleepers. Discuss
- 9. Distance between inner faces of the flanges, is kept
Options- A. equal to the gauge distance
- B. slightly less than the gauge distance
- C. slightly more than the gauge distance
- D. none of these. Discuss
- 10. Distance between the inner rail and check rail provided on sharp curve, is
Options- A. 40 mm
- B. 42 mm
- C. 44 mm
- D. 46 mm
- E. 50 mm Discuss
Railways problems
Search Results
Correct Answer: 6.096 m
Correct Answer: over riding
Correct Answer: Fish plates fit the web of the rail section
Correct Answer: supported rail joint
Correct Answer: four pairs of points, six acute angle crossings and two obtuse angle crossings
Correct Answer: 120.6 mm
Correct Answer: 1.676 m as a compromise gauge
Correct Answer: wooden sleepers.
Correct Answer: slightly less than the gauge distance
Correct Answer: 44 mm
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.