logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering Irrigation Comments

  • Question
  • Pick up the incorrect statement from the following:


  • Options
  • A. In free flooding irrigation, water is admitted at one corner of a field and is allowed to spread over the entire area
  • B. In check method of irrigation, the field is divided into smaller compartments and water is admitted to each in turn
  • C. In furrow irrigation water is admitted between the rows of plants in the field
  • D. None of these.

  • Correct Answer
  • None of these. 


  • Irrigation problems


    Search Results


    • 1. According to G.W. Pickles the effect of confining the flood water of a river between levee, is to increase

    • Options
    • A. rate of flood wave
    • B. water surface elevation during floods
    • C. maximum discharge
    • D. velocity and scouring action
    • E. surface slope of streams above the leveed portion.
    • Discuss
    • 2. If B and d are the bed width and depth of a channel in metres, the combined losses due to evaporation and seepage in cumecs per kilometre length of the channel, is

    • Options
    • A.
    • B.
    • C.
    • D.
    • Discuss
    • 3. When a canal and a drainage approach each other at the same level, the structure so provided, is

    • Options
    • A. an aqueduct
    • B. a syphon
    • C. a level crossing
    • D. inlet and outlet.
    • Discuss
    • 4. The main function of a diversion head works of a canal from a river, is

    • Options
    • A. to remove silt
    • B. to control floods
    • C. to store water
    • D. to raise water level
    • E. all the above.
    • Discuss
    • 5. The length of a meander is the distance along the river between the tangent point of one curve to the tangent point of

    • Options
    • A. reverse curve
    • B. next curve of the same order
    • C. reverse curve plus the width of the river
    • D. none of these.
    • Discuss
    • 6. F.S.L. of a canal at its head with respect to parent channel is kept

    • Options
    • A. at the same level
    • B. 15 cm lower
    • C. 15 cm higher
    • D. none of these.
    • Discuss
    • 7. For the design of major hydraulic structures on the canals, the method generally preferred to, is based on

    • Options
    • A. Bligh's theory
    • B. Electrical analogy method
    • C. The relaxation method
    • D. Khosla's method of independent variables.
    • Discuss
    • 8. The top of the capillary zone

    • Options
    • A. lies below the water table at every point
    • B. lies above the water table at every point
    • C. coincides the water table at every point
    • D. none of these.
    • Discuss
    • 9. Pick up the correct statement from the following:

    • Options
    • A. Duty of canal water is defined as the total area irrigated by the discharge averaging one unit during the base period of the duty
    • B. Duty of canal water is usually calculated at the head discharge of a channel
    • C. Duty of canal water at the head of a channel and at the outlet of a distributary, differ considerably due to progressive losses of water
    • D. Duty of canal water at the outlet of a distributary, is generally known as outlet factor or outlet discharge factor
    • E. All the above.
    • Discuss
    • 10. For smooth entry of water in a canal, the angle between head regulator and water is generally kept

    • Options
    • A. 80°
    • B. 90°
    • C. 110°
    • D. 120°
    • Discuss


    Comments

    There are no comments.

Enter a new Comment