logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering RCC Structures Design Comments

  • Question
  • The reinforced concrete beam which has width 25 cm, lever arm 40 cm, shear force 6t/cm2, safe shear stress 5 kg/cm2 and B.M. 24 mt,


  • Options
  • A. is safe in shear
  • B. is unsafe in shear
  • C. is over safe in shear
  • D. needs redesigning.

  • Correct Answer
  • is unsafe in shear 


  • RCC Structures Design problems


    Search Results


    • 1. If d and n are the effective depth and depth of the neutral axis respectively of a singly reinforced beam, the lever arm of the beam, is

    • Options
    • A. d
    • B. n
    • C.
    • D.
    • E.
    • Discuss
    • 2. The maximum area of tension reinforcement in beams shall not exceed

    • Options
    • A. 0.15%
    • B. 1.5%
    • C. 4%
    • D. 1%
    • Discuss
    • 3. Pick up the correct statement from the following:

    • Options
    • A. A pile is a slender member which transfers the load through its lower end on a strong strata
    • B. A pile is a slender member which transfers its load to the surrounding soil
    • C. A pile is a slender member which transfers its load by friction
    • D. A pile is a cylindrical body of concrete which transfers the load at a depth greater than its width.
    • Discuss
    • 4. In a prestressed beam carrying an external load W with a bent tendon is having angle of inclination ? and prestressed load P. The net downward load at the centre is

    • Options
    • A. W - 2P cos ?
    • B. W - P cos ?
    • C. W - P sin ?
    • D. W - 2P sin ?
    • E. W + 2P sin ?
    • Discuss
    • 5. To have pressure wholly compressive under the base of a retaining wall of width b, the resultant of the weight of the wall and the pressure exerted by the retained, earth should have eccentricity not more than

    • Options
    • A.
    • B.
    • C.
    • D.
    • E.
    • Discuss
    • 6. If R and T are rise and tread of a stair spanning horizontally, the steps are supported by a wall on one side and by a stringer beam on the other side, the steps are designed as beams of width

    • Options
    • A. R + T
    • B. T-R
    • C. R2 + T2
    • D. R-T
    • Discuss
    • 7. A prestressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is

    • Options
    • A.
    • B.
    • C.
    • D.
    • E.
    • Discuss
    • 8. A short column 20 cm x 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2, the Safe load on the column, should not exceed

    • Options
    • A. 4120 kg
    • B. 41, 200 kg
    • C. 412, 000 kg
    • D. none of these.
    • Discuss
    • 9. Thickened part of a flat slab over its supporting column, is technically known as

    • Options
    • A. drop panel
    • B. capital
    • C. column head
    • D. none of these.
    • Discuss
    • 10. The minimum cube strength of concrete used for a prestressed member, is

    • Options
    • A. 50 kg/cm2
    • B. 150 kg/cm2
    • C. 250 kg/cm2
    • D. 350 kg/cm2
    • E. 400 kg/cm2
    • Discuss


    Comments

    There are no comments.

Enter a new Comment