logo

CuriousTab

CuriousTab

Discussion


Home Civil Engineering RCC Structures Design Comments

  • Question
  • If T and R are tread and rise respectively of a stair, then


  • Options
  • A. 2R + T = 60
  • B. R + 2T = 60
  • C. 2R + T = 30
  • D. R + 2T= 30
  • E. 3R + 27 = 30

  • Correct Answer
  • 2R + T = 60 


  • RCC Structures Design problems


    Search Results


    • 1. If a bent tendon is required to balance a concentrated load W at the centre of the span L, the central dip h must be at least

    • Options
    • A.
    • B.
    • C.
    • D.
    • E.
    • Discuss
    • 2. The minimum number of main steel bars provided in R.C.C.

    • Options
    • A. rectangular columns is 4
    • B. circular columns is 6
    • C. octagonal columns is 8
    • D. all the above.
    • Discuss
    • 3. The effective span of a simply supported slab, is

    • Options
    • A. distance between the centres of the bearings
    • B. clear distance between the inner faces of the walls plus twice the thickness of the wall
    • C. clear span plus effective depth of the slab
    • D. none of these.
    • Discuss
    • 4. Dimensions of a beam need be changed if the shear stress is more than

    • Options
    • A. 10 kg/cm2
    • B. 15 kg/cm2
    • C. 20 kg/cm2
    • D. 25 kg/cm2
    • Discuss
    • 5. The effective width of a column strip of a flat slab, is

    • Options
    • A. one-fourth the width of the panel
    • B. half the width of the panel
    • C. radius of the column
    • D. diameter of the column
    • E. none of these.
    • Discuss
    • 6. Pick up the incorrect statement from the following:

    • Options
    • A. In the stem of a retaining wall, reinforcement is provided near the earth side
    • B. In the toe slab of a retaining wall, rein forcement is provided at the bottom of the slab
    • C. In the heel slab of a retaining wall, rein forcement is provided at the top of the slab
    • D. None of these.
    • Discuss
    • 7. If the effective length of a 32 cm diameter R.C.C. column is 4.40 m, its slenderness ratio, is

    • Options
    • A. 40
    • B. 45
    • C. 50
    • D. 55
    • E. 60
    • Discuss
    • 8. If W is the load on a circular slab of radius R, the maximum circumferential moment at the centre of the slab, is

    • Options
    • A.
    • B.
    • C.
    • D. zero
    • E. none of these.
    • Discuss
    • 9. As per I.S. 456 - 1978, the pH value of water shall be

    • Options
    • A. less than 6
    • B. equal to 6
    • C. not less than 6
    • D. equal to 7
    • Discuss
    • 10. The percentage of minimum reinforcement of the gross sectional area in slabs, is

    • Options
    • A. 0.10%
    • B. 0.12%
    • C. 0.15%
    • D. 0.18%
    • E. 0.20%
    • Discuss


    Comments

    There are no comments.

Enter a new Comment