Discussion
Home ‣ Civil Engineering ‣ Waste Water Engineering Comments
- Question
Disposal to sewage in large cities, is done in
Options- A. irrigation
- B. dilution
- C. oxidation
- D. putrifaction.
- Correct Answer
- dilution
- 1. If the side of a square sewer is 1000 mm, the diameter of a hydraulically equivalent circular section, is
Options- A. 1045 mm
- B. 1065 mm
- C. 1075 mm
- D. 1095 mm. Discuss
- 2. Flocculated particles do not change their
Options- A. size
- B. shape
- C. weight
- D. none of these. Discuss
- 3. Self-cleansing velocity is
Options- A. velocity at dry weather flow
- B. velocity of water at flushing
- C. velocity at which no accumulation remains in the drains
- D. velocity of water in a pressure filter. Discuss
- 4. Removal of oil and grease from sewage, is known
Options- A. screening
- B. skimming
- C. filtration
- D. none of these. Discuss
- 5. Pick up the correct statement from the following :
Options- A. In treated sewage, 4 PPm of D.O. is essential
- B. Only very fresh sewage contains some dissolved oxygen
- C. The solubility of oxygen in sewage is 95% that is in distilled water
- D. All the above. Discuss
- 6. The ratio of maximum sewage flow to average sewage flow for mains up to 1 m in diameter, is
Options- A. 1.5
- B. 2.0
- C. 3.0
- D. 4.0 Discuss
- 7. In SI units the power of sound is represented in
Options- A. kgs
- B. joules
- C. neutons
- D. watts. Discuss
- 8. The asbestos cement pipes are generally laid
Options- A. horizontally
- B. vertically
- C. at an angle of 30°
- D. at an angle of 60°. Discuss
- 9. Pick up the correct statement from the following :
Options- A. pH value indicates acidity and alkalinity of sewage
- B. In acidic sewage, the pH value is less than 7
- C. In alkaline sewage, the pH value is more than 7
- D. Fresh sewage is generally alkaline
- E. All the above. Discuss
- 10. The dimensions of a rectangular settling tank are : length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is
Options- A. 204 cu m
- B. 208 cu m
- C. 212 cu m
- D. 216 cu m
- E. 220 cu m. Discuss
Waste Water Engineering problems
Search Results
Correct Answer: 1095 mm.
Correct Answer: none of these.
Correct Answer: velocity at which no accumulation remains in the drains
Correct Answer: skimming
Correct Answer: All the above.
Correct Answer: 2.0
Correct Answer: watts.
Correct Answer: vertically
Correct Answer: All the above.
Correct Answer: 216 cu m
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.