A given signal's second harmonic is twice the given signal's fundamental frequency. Harmonics are generated when there are non-linearities in an amplifier (there are always non-linearities). The worse the non-linearities, the more harmonics. A signal at 27.5 MHz (approximate frequency for US citizen's band) would have a second harmonic at 55.0 MHz (on US channel 2!). Can you see why there might be problems? A CB operator might do well to place a low-pass filter on his radio.
5. What is the relationship between resistivity r and conductivity s?
The terminals of FETs are called gate, drain and source. You might be more familiar with bipolar junction transistors (BJTs), which have terminals called base, collector and emitter. FETs were conceptualized first, but BJTs were easier to produce and so developed sooner.
8. In which decade with the first transatlantic radio broadcast occur?
On December 12, 1901, a radio transmission received by Guglielmo Marconi resulted in the first transmission of a transatlantic wireless signal (Morse Code) from Poldhu, Cornwall, to St. John's, Newfoundland.
Correct Answer: Alternating Current and Direct Current
Explanation:
Electricity is voltage and current. Voltage is electrical pressure, and current is the flow of charged particles. The difference between alternating current (AC) and direct current (DC) is that the electrons in an AC circuit regularly reverse their direction. In a DC circuit electrons always flow in the same direction.