Discussion
Home ‣ Certification ‣ CISCO Certification Comments
- Question
Which of the following symbols indicate that a ping was successful?
Options- A. !
- B. .
- C. ?
- D. U
- Correct Answer
- !
ExplanationExplanation: The following table explains the output generated by ping:
! ? reply received
. ? timed out
U ? unreachable
C ? congestion
? ? unknown packet type
& packet lifetime exceeded
- 1. What do you use when you want to display a message to all the terminals connected to a router?
Options- A. banner login
- B. banner motd
- C. banner exec
- D. banner slip-ppp Discuss
- 2. We want to assign port 3 of our Catalyst 2950 switch to VLAN 3. What command will achieve this?
Options- A. switch(config-if)#switchport vlan 3
- B. switch#switchport access vlan 3
- C. switch(config)#switchport access vlan 3
- D. switch(config-if)#switchport access vlan 3 Discuss
- 3. What is the purpose of the AS_PATH attribute? Discuss
- 4. What is the difference between the types of routes allowed by default into IS-IS and OSPF areas? Discuss
- 5. How does OSPF determine the DR on a multi-access network? Discuss
- 6. What command will change the hostname of a router?
Options- A. router#host name new name
- B. router(config-router)#hostname new name
- C. router>host name new name
- D. router(config)#hostname new name Discuss
- 7. What is the meaning of amber SYST led on a 2960 switch?
Options- A. This is normal operation
- B. There is a bridging loop
- C. The switch IOS is loading
- D. The switch failed its POST Discuss
- 8. As a network administrator we want to make it easy to assign IP addresses to hosts. What protocol do we use?
Options- A. DNS
- B. DHCP
- C. HSRP
- D. NTP Discuss
- 9.
You are the administrator of network X. You decided to implement RIP in the following topology (click exhibit). You do not want R3 to receive RIP updates. What configuration changes need to be implemented?
Options- A. Implement a passive-interface on R1
- B. Nothing needs to be configured
- C. Create a sub-interface on R1
- D. Change the routing protocol to OSPF Discuss
- 10. Which layer of the OSI model is associated with LAN switches?
Options- A. The Transport layer.
- B. The Physical layer.
- C. The Network layer.
- D. The Data Link layer. Discuss
CISCO Certification problems
Search Results
Correct Answer: banner motd
Explanation:
Explanation: This MOTD banner is displayed to all terminals connected and is useful for sending messages that affect all users (such as impending system shutdowns). Use the no exec-banner or no motd-banner command to disable the MOTD banner on a line. The no exec-banner command also disables the EXEC banner on the line. When a user connects to the router, the MOTD banner appears before the login prompt. After the user logs in to the router, the EXEC banner or incoming banner will be displayed, depending on the type of connection. For a reverse Telnet login, the incoming banner will be displayed. For all other connections, the router will display the EXEC banner. Connection, Menu, and System Banner Commands
Correct Answer: switch(config-if)#switchport access vlan 3
Explanation:
Explanation: The switchport access vlan [number] command will configure a switch port to that VLAN. You can also use the switchport access vlan dynamic command to configure the switch port automatically in a certain VLAN depending on the VLAN membership of the incoming packets. For both commands to work properly the switch port needs to be in access mode
Correct Answer: If a router has more than one route to the same IP prefix, the best path is the one with the shortest AS_PATH (assuming other BGP attributes are equal)
Correct Answer: By default, all routes are advertised into all OSPF areas This includes interarea OSPF routes and external routes that have been injected into OSPF By default, IS-IS does not advertise interarea or external routes into an area, but injects a default route
Correct Answer: The router with the highest interface priority will be the router ID If all the interface priorities on the multi-access network are the same, the router with the highest router ID will be the DR
Correct Answer: router(config)#hostname new name
Explanation:
Explanation: To specify or modify the host name for the network server, use the hostname command in global configuration mode.
Correct Answer: The switch failed its POST
Explanation:
Explanation: When the switch failed its POST, Power-On Self Test, the SYST led will turn amber and the IOS did not load
Correct Answer: DHCP
Explanation:
Explanation: DHCP, as described by RFC 1541, or Dynamic Host Configuration Protocol is used for dynamically assigning network addresses and host specific configuration parameters.
Correct Answer: Implement a passive-interface on R1
Explanation:
Explanation: To block RIP broadcasts on an interface connected to a subnet of a RIP-enabled network add the passive-interface command to the RIP Process
Correct Answer: The Data Link layer.
Comments
There are no comments.Programming
Copyright ©CuriousTab. All rights reserved.