So, resistance of Wire 2 is R/4 as radius is half of wire 1, so area would be 4 times of wire 1.
Now for resistance in series. R= R1 + R2.
Therefore, Final R= R + R/4 = 5R/4
In colder clouds: droplets formed by Bergeron mechanism. But, in many parts of the world the air is too warm for ice crystals to form. This being the case, rain and snow cannot develop following the Bergeron Process. Instead, tiny droplets form as they collide into one another creating larger and larger droplet, this is known as collision-coalescence process. So, warmer clouds are associated with this keyword.
Application of temperature changes in the atmosphere is in adiabatics, or temperature change which are caused by compressing or allowing air to expand.
An electric fuse is a device which is used to limit the current in an electric circuit. The fuse safeguards the circuit and the electrical appliances from being damaged.
The fuse wire is generally an alloy of lead and tin. It has a low melting point and breaks the circuit if the current exceeds a safe value. The thickness and length of the fuse wire depends on the maximum current allowed through the circuit.
It is connected in series in the beginning of the electric circuits.
If too many electrical appliances of high power rating (like electric iron, water heater etc) are switched on at the same time, they draw an extremely large current from the circuit. This condition is called overloading and it can cause overheating of the wiring and lead to a fire. (heating effect and magnitude of the current)
According to Rayleigh's law, the intensity of scattered light varies inversely as the fourth power of its wavelength. Sunlight consists of seven colours. Of these, red has the maximum wavelength. During sunrise and sunset, the rays have to travel a larger part of the atmosphere because they are very close to the horizon.Therefore, light other than red is mostly scattered away. Most of the red light, which is the least scattered, enters our eyes. Hence, the sun and the sky appear red.
Aluminum has a resistivity varying from 2.65 to 2.82 × 10?8 ? m.The resistivity of copper is generally given as: 1.72 x 10-8 ?.m.So, since resistivity of aluminium is higher than that of copper, so Power dissipated will be greater than P. this is because rest of the factors (l, A and i) are constant.
Pascal's law is a principle in fluid mechanics that states that a pressure change occurring anywhere in a confined incompressible fluid is transmitted throughout the fluid such that the same change occurs everywhere.
This principle is stated mathematically as: P= P + rgh
Comments
There are no comments.Copyright ©CuriousTab. All rights reserved.